Quadro 4D V6 250mm Soft-Close Full Extension Undermount LH Drawer Slide Hettich 9 245 347

10 Inch Undermount Drawer Slide For Compact Cabinet Drawers

This Hettich Quadro V6 left-hand undermount drawer slide is a 250mm (10 inch nominal) ball-bearing, full-extension, soft-close runner built for frameless cabinet drawers with 1/2 to 5/8 inch sides. It is sold as a single left-hand cabinet member — pair it with the matching right-hand member and the appropriate drawer members to complete a drawer installation.

Key Features

• Full extension brings the entire drawer out to the cabinet face, making compact drawer contents fully reachable.
• Integrated soft-close catches the drawer at the end of travel and settles it shut silently without a damper add-on.
• Ball-bearing construction delivers smooth, precise travel under load across the life of the cabinet.
• 90 lb weight capacity handles a fully loaded short drawer in kitchen, bath, or office cabinetry.
• Compatible with 1/2 to 5/8 inch drawer sides covers both standard thicknesses in this nominal length range.
• Left-hand orientation — order one of each hand to complete a drawer pair.

Where a 10 Inch Slide Fits the Work

A 250mm runner serves the shortest practical undermount drawer: spice pull-outs beside a range, shallow vanity drawers, small base cabinet organizers, and compact office or bathroom storage units where the interior depth is only 11 inches or a little more. At full extension the entire box clears the opening, so nothing at the back of a short drawer stays out of reach. The 90 lb capacity is more than adequate for a drawer this size, even loaded with dense contents like tools or hardware.

Construction and Finish

The Quadro V6 runner is steel with a zinc finish — a functional, corrosion-resistant coating that stands up to indoor cabinetry service without drawing attention behind the drawer box. Ball bearings run in formed steel raceways, keeping travel precise and consistent. The integrated soft-close mechanism is built into the runner rather than added on, so closing action is part of the slide's design from the start, not a retrofit. The Quadro V6 series carries 4D adjustment capability, allowing the installed drawer front to be fine-tuned in height, side, depth, and tilt after hanging.

Suited for Frameless Cabinetry and Compact Layouts

This runner is designed for frameless cabinet construction, where the slide mounts directly to the flat cabinet side panel. Its 11 inch minimum installation depth makes it a practical choice in shallow base cabinets and bath furniture that lack the depth for a longer slide. Designers specifying compact pull-outs in modern, hardware-free kitchens will find the soft-close action and full extension combination appropriate for the format. Cabinet shops running small vanity and specialty drawer programs can source this runner for the short-drawer positions in a mixed-depth job.

The Right Runner for the Short Drawer

When the drawer is compact and the cabinet is shallow, component selection tightens up fast — a 10 inch full-extension, soft-close undermount slide in the Quadro V6 series puts the right specs where a short drawer needs them most.