Left-Hand Precision And Full Extension Reach

The Hettich Quadro V6 380mm left-hand undermount drawer slide delivers soft-close, full-extension performance for frameless cabinetry where concealed hardware and smooth, damped motion are the standard. This is the left-hand cabinet member — one component of a handed pair — and it is built for 1/2 to 5/8 inch drawer sides in a 15-inch drawer depth application.

Key Features

• Left-hand orientation — a handed member designed for the left side of the cabinet; pair with the matching right-hand member to complete one drawer installation.
• Soft-close motion — integrated damping catches the drawer near the end of travel and settles it shut without slamming.
• Full extension — the drawer member travels the full slide length, bringing the entire drawer box out to the cabinet face for complete rear access.
• 90 lb weight capacity — rated per pair at 90 lb, handling demanding kitchen, bath, and utility drawer loads.
• Ball bearing construction — steel ball bearings in formed raceways deliver smooth, consistent travel under load across years of cycles.
• Frameless cabinet fit — mounts directly to the flat interior side panel of a frameless (European-style) cabinet on standard system holes.

Where This Slide Works

Frameless production cabinetry is the natural home for the Quadro V6: the slide mounts flush to the interior side panel without rear brackets, making installation straightforward on a 32mm system. The 380mm nominal length suits shallow to mid-depth drawer applications — spice drawers, vanity drawers, shallow utility pulls, and base cabinet drawers where a 15-inch drawer box is the right depth. The 90 lb per-pair rating handles fully loaded kitchen drawers without hesitation, and full extension means nothing stays buried at the back. For cabinet shops running frameless lines with a consistent drawer box depth, this slide fits neatly into that workflow.

Build and Finish

The Quadro V6 is a steel, ball-bearing undermount slide with a zinc finish — a functional protective coating that stands up to the humidity and temperature variation of a working kitchen or bath. The slide is engineered for drawer sides between 1/2 inch and 5/8 inch thick; the locking device and adjustment system are calibrated to that thickness range, so the drawer box must be built to spec. Minimum installation depth is 15-15/16 inches, so the cabinet interior needs to clear that dimension behind the drawer. The Quadro V6 series carries Hettich's 4D adjustment capability, meaning the installed drawer front can be fine-tuned in height, side, depth, and tilt after hanging — a meaningful time saver during installation and for any future realignment.

Who Should Order This Slide

Cabinet shops building frameless kitchens, baths, or furniture pieces with shallow to mid-depth drawers will find the 380mm Quadro V6 a reliable production choice: the 4D adjustment keeps installation moving and eliminates shimming. Designers specifying concealed hardware in residential or light-commercial work get soft-close damping and full-extension reach in a slide that disappears beneath the box. Contractors replacing worn slides in an existing Quadro V6 installation should confirm their cabinet's interior depth clears the 15-15/16 inch minimum before ordering. Because locking devices, rear brackets, and adjustment components for the Quadro V6 are series-specific, any accessories needed to complete the installation should come from the Quadro V6 program.

The Right Slide, Correctly Handed

Full extension and soft-close in a 380mm undermount package, sized for frameless frameless cabinetry and built for drawer sides up to 5/8 inch — the left-hand Quadro V6 brings Hettich's 4D adjustability to every drawer in the run.