15-Inch Undermount Slide for Frameless Cabinet Drawers Built to Move Quietly

The Hettich Quadro V6 right-hand undermount drawer slide in 380mm (14-15/16 inch nominal length) delivers full-extension travel and integrated soft-close action in a concealed, ball-bearing design. This single right-hand cabinet member suits frameless construction and is sized for drawer boxes built to the 380mm nominal length, with drawer sides from 1/2 inch to 5/8 inch thick.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, putting the back of the drawer within reach.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently without a separate adapter.
• Ball-bearing action runs smoothly under load across the full travel range.
• 90 lb weight capacity handles loaded kitchen and utility drawers with confidence.
• Right-hand orientation — pair with the matching left-hand member and both drawer members to complete the installation.
• Fits 1/2 inch to 5/8 inch drawer sides in frameless cabinet construction.

Where This Slide Fits the Job

At 380mm nominal length, this slide suits compact to mid-range drawers in frameless kitchen base cabinets, bath vanities, and built-in furniture. The minimum installation depth is 15-15/16 inches, so verify the cabinet interior runs at least that deep before specifying. Full extension means the entire drawer clears the opening — useful for pots-and-pans drawers, deep pantry pull-outs, and any application where contents in the rear need to be reachable without reaching blind. The 90 lb rating gives plenty of headroom for a fully loaded drawer without pushing into heavy-duty territory.

Construction and Finish

The slide is steel with a zinc finish that handles the demands of a production cabinetry environment. Zinc plating keeps the slide protected through everyday cycling indoors. Ball bearings run in formed steel raceways rather than nylon rollers, which translates to consistent action under varying loads and over a long service life. The integrated soft-close mechanism is built into the slide itself — no aftermarket damper to source, align, or replace separately.

Who Orders This Slide and Why

Cabinet shops running frameless lines reach for this slide when they need a reliable, concealed undermount in a compact length with soft-close already dialed in. The 380mm size covers drawers that do not need the reach of a longer slide but still demand full access and a quiet close — a combination that fits a lot of secondary storage drawers in kitchen and bath work. Designers specifying handle-less or push-to-open fronts should note that push-to-open capability requires a compatible locking unit or adapter; confirm Quadro V6 compatibility before specifying that configuration. Contractors and finish carpenters who work in frameless production environments will find the zinc Quadro V6 a straightforward, consistent performer that does not require a separate soft-close adapter order to complete the install.

The Right Length, Ready to Work

The Quadro V6 380mm right-hand slide gives frameless cabinetry a concealed, soft-closing, full-extension drawer runner at a compact length — built in steel, finished in zinc, and rated for the loads a production kitchen or bath drawer actually sees.