Soft-Close Precision and Frameless Fit in a 580mm Right-Hand Undermount Slide

The Hettich Quadro V6 is a right-hand, full-extension undermount drawer slide built for frameless cabinetry, delivering integrated soft-close on ball bearings with a 90 lb load rating. At a nominal length of 22-13/16 inches (580mm), it suits deeper drawer runs where full rear access matters.

Key Features

• Full extension brings the entire drawer out to the cabinet face so nothing stays hidden at the back.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently, with no add-on damper required.
• 90 lb load rating handles a fully stocked kitchen drawer or a deep utility pull-out with confidence.
• Right-hand orientation pairs with a left-hand member to complete a single drawer installation.
• Ball bearing construction rolls smoothly under load across thousands of open-close cycles.
• Zinc finish protects the steel cabinet member through years of indoor service.

Where This Slide Fits the Job

A 580mm undermount slide is the right call for drawer boxes in the 22-to-23-inch depth range — deep enough for pots-and-pans drawers, file pull-outs, and pantry inserts where you need the full contents within reach, not buried at the back. Full extension means the drawer travels out to the cabinet face, so a cook reaching for a pan or a shop hand pulling a deep utility drawer gets everything without digging. The 90 lb rating supports those loads comfortably under daily cycling. This slide is engineered for frameless (European-style) cabinets and mounts directly to the flat interior panel — no face-frame brackets required, and no rear socket hardware to track down. The minimum installation depth is 23-13/16 inches, so measure the cabinet interior before building the box.

Build and Finish

The Quadro V6 runs on steel ball bearings in formed raceways, which is what keeps the action smooth and consistent as the load changes across the life of the drawer. The zinc finish on the steel member handles the moisture and cleaning cycles common in kitchen and bath environments without showing wear. Drawer side thickness compatibility spans 1/2 inch to 5/8 inch, giving the slide flexibility across different box-building conventions without requiring a thickness-specific version. The slide must be built to the Hettich Quadro V6 specification — drawer box width, rear notch, and locking device drilling all need to follow the manufacturer's published spec for the installation to seat and adjust correctly.

Who Orders This Slide and Why

Cabinet shops running frameless lines in the 22-to-23-inch drawer depth range reach for this slide when the build calls for a clean undermount look with a damped close and a reliable weight rating. Designers specifying residential kitchens choose the Quadro V6 when the drawer front is handleless or the installation calls for an uncluttered look inside the box — no slide hardware visible at the sides. Contractors doing production installs appreciate the consistent soft-close behavior and the ball-bearing action that holds up across a full kitchen's worth of drawers. This is a right-hand cabinet member: pair it with its left-hand counterpart to complete one drawer. Both members are required for a working installation.

A Dependable Undermount for Deeper Frameless Drawers

When the drawer depth pushes toward 23 inches and the build calls for a clean, concealed slide with soft-close and a solid load rating, the Hettich Quadro V6 in 580mm delivers the combination — built on ball bearings and ready to go into a frameless cabinet without extra hardware.