Hettich Quadro V6 450mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9245364

Hettich Quadro V6 450mm Drawer Slide For Smooth Undermount Action

Hettich Quadro V6 450mm drawer slide is a full extension undermount slide that supports drawers in standard applications where easy access and clean appearance are important. The right hand orientation gives a defined mounting position on the cabinet, which helps installers keep pairs organized by side when laying out casework. Ball bearing guidance in the mechanism supports consistent movement under load, which is useful on frequently used drawers. The integrated Silent System provides soft closing that slows the drawer at the end of travel, reducing slamming in everyday use. Load capacity up to 30 kg for standard applications lets this slide handle typical residential and light commercial drawer loads, while a version for particularly light drawers up to 10 kg supports small or delicate drawers where lighter running action is desired.

Key Quadro V6 Details That Support Clean Installations

• Full extension undermount design keeps hardware hidden under the drawer, which helps achieve a clean, modern cabinet look while still allowing access to the full drawer depth during use.
• Integrated Silent System creates a soft-close action at the end of travel, which reduces impact on the drawer box and cabinet front over time in high-use areas.
• Convenient slide-on installation with 4D catches and tilt adjustment speeds up drawer fitting, which can shorten install time on multi-drawer runs where repeatable alignment is needed.
• Tool-less, intuitive adjustment of the drawer front panel helps fine-tune reveals on site, which is valuable when cabinets or floors are slightly out of square.
• Height adjustment up to plus 2 mm, side adjustment up to plus or minus 1.5 mm, depth adjustment up to plus or minus 2 mm, and tilt adjustment give ample range to align fronts in a bank.
• Galvanised steel construction provides a robust slide body, which supports long-term function in typical woodworking and cabinet shop environments.

Undermount Slide Fit, Length, And Adjustment Details

This undermount drawer slide is specified at 450 mm length, which suits drawer depths planned around that metric dimension in casework layouts. The right hand configuration defines its side-specific role in a drawer pair, aiding organized installation on the cabinet interiors. Tool-less adjustment of the drawer front panel in height, side, depth, and tilt allows installers to dial in gaps and alignment after the drawer box is mounted, which helps correct small layout variances without reworking the drawer. The max drawer side profile thickness of 15 mm guides drawer box construction, so side material can be chosen to sit correctly over the undermount hardware while still leaving clearance for the adjustment range.

Using This Quadro V6 Slide In Drawer Projects

Where This Undermount Drawer Slide Works Best

This Quadro V6 undermount drawer slide from Hettich America Corporation is suited to drawer installations that benefit from full extension and concealed hardware, such as kitchen, bath, or office casework built around 450 mm drawer depths. Its load capacity up to 30 kg for standard applications fits many common storage drawers, so installers can apply one slide family across multiple cabinet runs. A separate version for particularly light drawers up to 10 kg lets the same product class cover small utility or narrow drawers where lighter contents are expected. Integrated Silent System soft closing helps on drawers that are opened and shut frequently during the day, limiting shock on fronts and reducing operational noise in shared spaces. The galvanised steel slide body suits woodworking shops and jobsite conditions where robust metal components support stable performance once installed.

Why Quadro V6 4D Adjustment Supports Consistent Results

The Quadro V6 slide provides slide-on installation with 4D catches and tilt adjustment, which allows the drawer box to engage quickly with the undermount hardware and then be fine-tuned in four directions for front alignment. Tool-less, intuitive adjustment of the drawer front panel simplifies setting reveals across a stacked bank, because height up to plus 2 mm and side adjustment up to plus or minus 1.5 mm can be dialed in without removing the drawer. Depth adjustment up to plus or minus 2 mm helps bring fronts flush to adjacent faces, reducing visual stepping between neighboring cabinets. Tilt adjustment allows correction when floors or cabinets introduce slight racking, letting installers straighten the front plane without rebuilding the drawer box. Load capacity to EN 15338, Level 3 indicates the slide has been tested against a recognized European standard for drawer systems, giving a clear benchmark for typical service conditions in cabinetry.

Common Questions About This Hettich Undermount Slide

Selecting This Quadro V6 Slide For Your Next Build

The Quadro V6 450 mm undermount drawer slide with integrated Silent System gives installers a full extension, soft-close option built from galvanised steel for standard cabinet applications. Its right hand orientation, slide-on installation, and 4D tool-less adjustment support efficient layout and alignment on site. Load capacity up to 30 kg for standard applications, a defined 450 mm length, and compatibility with drawer sides up to 15 mm thickness help plan drawer box construction around clear parameters. For projects needing a concealed undermount runner with soft closing and fine front adjustment, this Hettich Quadro V6 slide provides a specification-focused solution ready to be integrated into your next run of casework.