Hettich Quadro V6 Undermount Slide for Frameless Cabinetry With Soft-Close

The Hettich Quadro V6 is a right-hand, full-extension undermount drawer slide with integrated soft-close, built for frameless cabinet installations. At a 480mm nominal length with a minimum installation depth of 19-7/8 inches, it carries drawers up to 90 lb and stays completely hidden beneath the drawer box when the drawer is open.

Key Features

• Full extension brings the entire drawer out to the cabinet face so every inch of the box interior is reachable.
• Integrated soft-close catches the drawer in the last inch of travel and settles it shut silently without a separate adapter.
• 90 lb weight capacity handles heavily loaded kitchen, bath, and storage drawers with ease.
• Ball bearing construction delivers a smooth, consistent pull across the full range of travel, cycle after cycle.
• Frameless cabinet design mounts directly to the cabinet side panel for a clean, production-ready installation.
• Right-hand orientation pairs with the matching left-hand member to complete one drawer installation.

Where This Slide Fits the Job

The Quadro V6 is engineered for frameless cabinet construction, where the slide screws directly to the cabinet side panel. Its 480mm nominal length suits drawer boxes built to that specification, making it a natural fit for standard kitchen base cabinet drawers and bath vanity drawers where the full drawer interior needs to be reachable at a pull. The 90 lb capacity covers pots and pans, file storage, or any heavily loaded drawer that sees daily use. Because the slide sits beneath the box and out of sight, the drawer interior presents cleanly with no visible hardware along the sides.

Construction and Finish

The Quadro V6 runs on steel ball bearings for a fluid, controlled pull that holds up over years of cycling. The zinc finish protects the steel members through the life of a residential or light commercial installation, and the concealed undermount position keeps the hardware sheltered from the wear and cleaning that cabinet interiors see. The slide accommodates drawer sides from 1/2 inch to 5/8 inch thick, so it works with both standard 1/2 inch and the more common 5/8 inch drawer side stock without swapping to a different version. The locking device that secures the drawer box to the slide is part of the Quadro V6 system; confirm the locking device and any adjustment hardware against the Hettich Quadro V6 series specification before ordering accessories, as components are series-specific.

Who Orders This Slide

Cabinet shops running frameless production work reach for the Quadro V6 when the spec calls for integrated soft-close and full extension in one concealed package. Designers specifying kitchens or bath vanities get the clean, hardware-free drawer side that undermount slides deliver, with the damped close that end users expect in a premium installation. Contractors sourcing for a multi-unit project benefit from the consistent 480mm sizing, which drops straight into a standard drawer box without custom fitting. This is a right-hand single member: order one right-hand and one left-hand Quadro V6 to complete a single drawer installation.

The Right Slide for a Concealed, Full-Access Installation

When the spec calls for soft-close, full extension, and a clean frameless install in one undermount package, the Hettich Quadro V6 at 480mm delivers all three without compromise — pair the right-hand member here with its left-hand counterpart and the drawer is ready to hang.