Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2-3/8" Diameter x 28" High Rockwell Single Table Leg gives a work surface or table a defined 28 inch high support point, which helps set consistent finished height across cabinets, islands, or freestanding tables. The 2-3/8 inch diameter round column concentrates strength into a compact footprint, which matters when a leg must carry load without taking up unnecessary floor space. This Peter Meier, Inc. leg is part of the Rockwell series, so the form factor stays consistent across table, counter, and bar height options, which helps keep a project visually aligned when mixing heights in the same room. The black matte finish keeps reflections down and visually recesses the leg under tops, which suits work surfaces where the hardware should do its job without drawing attention. The single leg format supports layouts where one or more corners rely on leg support instead of cabinetry.
The 4 9/16 inch square mounting plate gives a clear zone for fastening to the underside of a table, work surface, counter, or bar top, which simplifies layout when spacing legs along the edge. Because the plate is square, orientation is straightforward against straight edges on cabinets or framing, which helps speed installation on repetitive runs. The 1 1/8 inch adjustable foot at the base gives vertical travel relative to the 28 inch nominal leg height, which is useful when matching an existing top height or stepping over modest floor irregularities. That adjustment range also lets installers pitch the leg slightly to align with tops that are not perfectly flat, which helps avoid rocking and reduces stress on fasteners over time. Together, the plate and adjustable foot create a simple top-and-bottom interface that supports predictable results across multiple projects.
The Rockwell Leg Single,28"H,2.36"DIA,BM format suits table-height applications, where a 28 inch leg supports seated work or dining surfaces. In workrooms, the leg can carry open corners of laminate or wood tops when cabinetry does not run full depth, which preserves knee space while adding structural support. In office or shop layouts, the consistent 2.36 inch diameter keeps the profile compact around chairs, stools, and storage, which reduces interference with movement under the surface. Because the web description notes table, counter, and bar heights are available, the 28 inch version aligns specifically with standard table-height runs, while other heights from the same series can serve standing or bar zones in the same project.
The combination of a 28 inch high tube and 1 1/8 inch adjustable foot gives usable height range around a standard table baseline, which helps tie freestanding legs to fixed cabinet or frame heights without custom cutting. The 4 9/16 inch (116mm) square mounting plate locates the load close to the leg centerline, which limits twisting when tops are pushed, pulled, or leaned on during daily use. The black matte finish on the leg body helps conceal scuffs and marks compared to glossier surfaces, which is helpful in high-contact areas such as work surfaces or shared tables. With a defined manufacturer part number, 960-7S-02, replacements or additional legs can be sourced to match existing installations, which keeps the visual line and functional height consistent when expanding or repairing a run of tables or counters.
The 2-3/8" Diameter x 28" High Rockwell Single Table Leg is intended for table-height applications, so it supports seated work or dining tops around a standard table elevation.
The 1 1/8 inch adjustable foot lets the installer fine-tune final height at the floor, which compensates for uneven surfaces and helps bring multiple legs to a common plane.
The 4 9/16 inch square mounting plate spreads load under the top and provides a clear fastening area, which helps resist racking forces on tables and work surfaces.
This Rockwell single table leg is used under table-height work surfaces, such as desks, shop tables, and islands where one or more corners need structural leg support.
The 2-3/8 inch diameter gives a compact round profile, which provides strength while limiting obstruction under tables where chairs or knees move nearby.
The black matte finish visually recesses the leg under tops and reduces reflections, which helps the surface material stand out in both residential and shop environments.
The Rockwell Leg Single,28"H,2.36"DIA,BM format ties a work surface directly to a defined table-height support with a compact 2-3/8 inch diameter tube. The 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate convert that tube into a practical structural point from top to floor. The black matte finish keeps the visual impact low so the focus stays on the surface material while the leg carries the load. For table-height runs that need a repeatable, part-numbered leg solution from Peter Meier, Inc., this Rockwell single table leg provides a consistent way to support corners and edges across multiple projects.
Sold In: 1 Each
