2-3/8" Diameter x 28" High Rockwell Single Table Leg, Stainless Steel

2-3/8" Rockwell Table Leg For Stable Work Surfaces

2-3/8" diameter 28" Rockwell table leg from Peter Meier, Inc. provides a stainless steel support for work surfaces and tables where a single structural leg is needed. The 28 inch height establishes a standard work surface or table elevation using a consistent dimension, so layouts stay uniform across a run of cabinets or freestanding tops. The stainless steel construction gives a metal support body for the leg, which helps the assembly handle typical work surface loads in woodworking and shop environments. The single-leg format suits layouts where one corner or edge of the top is standing on a post instead of a full base cabinet. With a branded Rockwell leg, the part number 960-7S-SS ties directly to this size, height, and finish combination for repeat ordering across multiple projects.

Rockwell Leg Details That Support Daily Use

• The 2-3/8 inch (2.36 inch) diameter cylindrical leg creates a broad bearing profile against the floor, which spreads loads over a larger contact area for a more confident stance under a typical work surface.
• The stainless steel material provides a rigid metal structure for the leg body, which supports table and work surface applications where a solid post-style support is preferred.
• The Rockwell single-leg design focuses on one vertical support element, which works well at table corners, peninsulas, or open sides where a clean post support is desired.
• The manufacturer part number 960-7S-SS precisely identifies this 28 inch stainless steel Rockwell leg, which simplifies reorders and keeps future replacements consistent across multiple installations.
• The classification under Work Surface & Tables and Table Legs confirms the leg is intended for supporting tops, which directs it toward benches, tables, counters, and similar horizontal surfaces.

Mounting Plate And Adjustable Foot For Setup

This Rockwell single table leg uses a 4 9/16 inch (116 mm) square mounting plate at the top, which creates a broad interface to the underside of the work surface so screw attachment points are spread over more area. That square shape helps resist twisting of the leg under side loads because the fasteners sit on a wide pattern. An integrated 1 1/8 inch adjustable foot built into the leg gives height adjustment, so minor floor variation can be taken up at the bottom of the leg while keeping the top level with adjacent cabinets or supports. The combination of a fixed 28 inch nominal leg height and an adjustable foot lets installers fine-tune final elevation on site without altering the main tube.

Using The Rockwell Single Leg In Real Projects

Where This Stainless Rockwell Leg Works Best

The stainless steel Rockwell single table leg fits into work surface and table layouts that call for a 28 inch high support post, such as standard-height tables or work benches that align with surrounding cabinetry. The 2-3/8 inch diameter provides a substantial-looking column under the surface, so the leg reads as a structural element rather than a light decorative dowel. In applications like open-ended desks, peninsulas, or islands, this single leg can support an exposed corner where there is no cabinet underneath, tying the top back to the floor with a clean vertical member. Because the mounting plate measures 4 9/16 inches square, it spreads the connection over a wider footprint under the top, which helps keep the corner of the work surface feeling firm during everyday use. The adjustable foot range of 1 1/8 inches gives enough travel to compensate for typical floor irregularities in shops or finished interiors without resorting to shims at the base.

How Rockwell Details Support Level, Repeatable Results

The Rockwell single table leg, at a fixed 28 inch height, establishes a repeatable reference when multiple legs support a run of tables, so each station lines up at the same working level. The 2-3/8 inch diameter stainless tube resists bending under normal vertical loads from tops and equipment, supporting predictable performance as weight is placed on the surface. With the 4 9/16 inch square mounting plate, screw locations sit on a wider pattern, which reduces the tendency for the leg to rotate or loosen at the top under side pressure. The 1 1/8 inch adjustable foot built into the design allows fine adjustment after the top is installed, which lets installers dial in a solid, rock-free stance even on slightly uneven floors. The clearly defined manufacturer part number 960-7S-SS allows the same configuration of height, diameter, and finish to be specified across projects, supporting consistent appearance and leg performance from job to job.

Common Questions About The Rockwell Single Table Leg

Selecting This Rockwell Leg For Your Next Top

The 2-3/8 inch diameter 28 inch Rockwell table leg in stainless steel from Peter Meier, Inc. combines a defined height, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot to support standard-height work surfaces. At Wurth Baer Supply, this Rockwell single leg and part number 960-7S-SS align with work surface and table projects that need a dedicated post support under one corner or edge, helping bring your next bench, desk, or island to a consistent working height.