Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2-3/8" Diameter x 28" High Rockwell Single Table Leg, Chrome is a Peter Meier, Inc. component designed as a structural support for work surfaces and tables, so you can set finished height with a known 28 inch starting point. The 2.36 inch diameter round steel profile creates a compact footprint while spreading vertical load into the floor, which helps when you need stable support under narrow tops or corners. The chrome finish provides a clean, bright look that integrates into modern shop, office, or residential environments, so the support visually matches other chrome components in a run. As a single table leg, it works in layouts where the remaining support comes from walls, frames, or cabinets, giving flexibility to position this leg exactly where additional bearing is required.
This Rockwell single table leg uses a 4 9/16 inch (116 mm) square mounting plate at the top, providing a broad interface to the underside of the work surface so load is spread over more area than a small bracket. The square plate form makes layout straightforward, because edges can align with cabinet faces or top edges during positioning. The 1 1/8 inch adjustable foot at the bottom permits height change within that range, which helps bring the work surface into level when floors vary across a run. That adjustment also allows fine tuning to coordinate the leg height with adjacent cabinets or frames, reducing twist in the top and helping doors and drawers in nearby units operate more smoothly.
The 2-3/8" Diameter x 28" High Rockwell Single Table Leg, Chrome sits in the work surface and tables class, so it fits projects like shop benches, office tables, and utility tops in woodworking environments supplied by Wurth Baer Supply. The 4 9/16 inch square mounting plate gives this leg a defined interface to most flat underside surfaces, which suits laminated tops, solid panels, or composite work surfaces that can receive a plate footprint of that size. Because the leg is sold as a single unit, it adapts well to layouts where one corner or span of a top needs a point support while the rest relies on cabinet boxes or wall cleats. The chrome finish can visually tie into other chrome hardware available from Wurth Baer Supply, which helps maintain design continuity across cabinetry, tables, and support structures in the same room.
The 28 inch high specification, combined with the 1 1/8 inch adjustable foot, gives a defined vertical range for establishing final work surface height, which is valuable when aligning several tables or benches in a row. The 2.36 inch diameter round leg provides predictable clearance around the base, simplifying layout when positioning legs relative to chair legs, casters, or under-bench storage. The 4 9/16 inch (116 mm) square mounting plate dimension lets installers pre-plan hole patterns or reinforcement zones on tops, reducing layout time from job to job that repeat the same Rockwell configuration. The Peter Meier, Inc. brand and the 960-7S-C1 manufacturer part number allow precise specification on drawings or material lists, which reduces substitution risk and helps every leg on the project match height, finish, and diameter. As part of Wurth Baer Supply's work surface and tables offering, this Rockwell leg integrates into broader woodworking hardware packages, streamlining sourcing when outfitting entire shops or commercial spaces.
The 2-3/8" Diameter x 28" High Rockwell Single Table Leg, Chrome has a 28 inch nominal height plus a 1 1/8 inch adjustable foot, allowing the final work surface height to shift within that adjustment range.
The 4 9/16 inch (116 mm) square mounting plate spreads load over a larger underside area and gives straight edges for aligning the leg with cabinet fronts or top edges during layout.
The 2.36 inch diameter sets a compact footprint, leaving more floor area free around the base while still providing a defined point support under the work surface.
This Rockwell leg is categorized under work surface and tables, aligning it with benches, tables, and tops in woodworking, office, or utility environments supplied by Wurth Baer Supply.
The Peter Meier, Inc. 960-7S-C1 part number uniquely identifies this 28 inch chrome Rockwell leg, aiding consistent specification, ordering, and repeat use across multiple projects.
The chrome finish provides a bright, reflective surface that coordinates with other chrome hardware, helping the support visually align with surrounding fittings and fixtures.
The 2-3/8" Diameter x 28" High Rockwell Single Table Leg, Chrome from Peter Meier, Inc. combines a defined 28 inch height, 1 1/8 inch adjustable foot, and 4 9/16 inch square mounting plate, so it fits straightforwardly into work surface or table layouts that demand predictable support. Using the 960-7S-C1 Rockwell leg through Wurth Baer Supply lets you repeat the same chrome, 2.36 inch diameter support wherever a single point leg is the right solution in your bench or table design.
Sold In: 1 Each
