2-3/8" Diameter x 28" High Rockwell Single Table Leg, Aluminum Silver

Rockwell Single Table Leg For Stable Work Surfaces

Rockwell single table leg gives you a straightforward way to support a work surface or table using a single structural leg. The 2-3/8 inch diameter steel profile carries vertical load over a compact footprint, which matters when you are working under cabinets, along walls, or where floor clearance is limited. The 28 inch high leg establishes a standard work-surface height when combined with a typical top thickness, helping keep bench and table projects consistent across a shop or installation. The aluminum silver finish presents a neutral, clean look that fits easily with common laminates and hardware lines in commercial or residential spaces. Being part of the Rockwell table leg line from Peter Meier, Inc. keeps component styling consistent when you are mixing table, counter, and bar heights in one project.

Key Rockwell Single Table Leg Details In Practice

• The 28 inch height sets a predictable base dimension, which simplifies laying out apron heights, cabinet clearances, and work-surface ergonomics during planning.
• The 2-3/8 inch diameter cylindrical leg shape concentrates strength into a modest footprint, leaving more room for knees, storage, or under-counter equipment.
• The aluminum silver finish provides a uniform, metallic appearance that coordinates with other silver-toned cabinet hardware for a cohesive installation.
• The square mounting plate gives you a defined interface between leg and top, so hole layout and fastener placement can be repeated accurately across multiple legs.
• The Rockwell single table leg configuration suits freestanding work surfaces or peninsula-style tops where one or more independent legs carry the outer edge.

Mounting And Adjustment Details For This Table Leg

The 4 9/16 inch (116mm) square mounting plate on the Rockwell single table leg creates a clear mounting zone on the underside of the top, which helps during drilling and fastening in the shop or on-site. The plate size spreads load over a wider section of the substrate, which is useful on composite or laminate tops that benefit from a broader attachment area. The 1 1/8 inch adjustable foot built into this leg provides vertical travel at the floor, giving you a way to fine-tune height against minor floor irregularities while keeping the top level with adjacent cabinets or other legs. Adjustment at the foot avoids reworking the top or shimming at the plate, which keeps the installation cleaner and quicker.

Using The Rockwell Leg Across Tables And Counters

Where This Rockwell Single Table Leg Fits Best

The Rockwell single table leg is designed as part of a work surface and tables solution, so it suits applications where a 28 inch high support is appropriate for a table or lower work surface. In shop environments, the fixed height helps you match new benches or auxiliary stations to existing work tables, easing material transfer and jig reuse. In residential or commercial projects, the aluminum silver finish works with many light or medium-toned tops, letting the leg disappear visually under the surface while still matching silver cabinet pulls or hinges. Because this leg is sold as a single unit, it adapts well to peninsulas or offset support situations where only one additional support point is required along a run. The cylindrical 2-3/8 inch diameter profile also helps the leg sit comfortably near seating positions without presenting sharp corners.

Details That Support Repeatable Alignment And Results

The 4 9/16 inch square mounting plate on the Rockwell single table leg gives you straight edges to reference from the front and side of a top, which streamlines layout when you are installing multiple legs along a line. With a known plate dimension, you can build simple jigs or templates to position screw locations, saving layout time between identical workstations or tables. The 1 1/8 inch adjustable foot allows each leg to be dialed to final height after the top is in place, which matters when tying into existing cabinet runs or aligning with adjacent modules in a large workspace. That adjustment travel also provides room to compensate for typical slab or subfloor variations, so the load can be shared evenly across all Rockwell legs in a group. Using a consistent Peter Meier Rockwell leg across table, counter, and bar heights keeps the visual language of the project unified while still giving you discrete height options for each zone.

Common Questions About This Rockwell Table Leg

Selecting This Leg For Your Next Work Surface

The Rockwell single table leg combines a 28 inch height, 2-3/8 inch diameter steel construction, and an aluminum silver finish to support work surfaces in shops, offices, or residential projects. The 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot give you predictable interfaces at both top and floor, which streamlines layout and leveling when building runs of tables or tying into cabinet lines. For projects calling for coordinated table, counter, and bar solutions, this Rockwell leg at Wurth Baer Supply provides a defined, repeatable component around which to plan your work surfaces.