2-3/8" Diameter x 34-1/2" High Rockwell Table Leg Set, Black Matte, 4/Set

Rockwell Table Leg Set For Work Surfaces

Rockwell table leg set describes a set of table legs designed to support work surfaces using the Rockwell configuration from Peter Meier, Inc. The set is defined as a table leg solution under the Work Surface & Tables category, so it targets projects where a stable understructure is needed for a top. The product is identified as a table leg set in the Table Legs product class, which fits applications where separate legs are preferred over fixed bases or cabinets. The manufacturer part number 960-34-02 ties this specific configuration to the Rockwell series, helping match legs to repeat jobs or existing layouts. The set is offered by Wurth Baer Supply within its woodworking-focused assortment, aligning the legs with cabinet, work surface, or table construction handled by professional shops and serious DIY users.

Key Rockwell Leg Details That Support Builds

• The legs are 2-3/8 inch in diameter, which creates a defined footprint that spreads load over a wider area on the floor and helps support work surfaces in applications where stability is important.
• The height of each leg is 34-1/2 inches, which positions the supported surface in a height range suited for many work surface or counter-style builds where users need a standing working level.
• The set is described as black matte, so the finish presents a non-reflective appearance that can blend under dark tops or modern designs and helps achieve a consistent, subdued visual under the surface.
• The product is specified as a set of 4 legs, which matches typical four-corner support layouts and allows builders to plan a straightforward support pattern for rectangular or square work surfaces.
• The product is classified under Work Surface & Tables with the subcategory Table Legs, aligning it with table and worktop applications and supporting use anywhere a separate leg structure is preferred under a surface.

Mounting Plate And Adjustable Foot Use Details

The Rockwell table leg set is specified with an adjustable foot measuring 1 1/8 inches, which offers height adjustment at the floor contact point so installers can fine-tune level on uneven surfaces. The mounting interface is defined by a 4 9/16 inch, or 116mm, square mounting plate, which provides a broad contact area under the work surface so loads transfer through a larger footprint. The square mounting plate geometry gives a consistent reference when positioning legs near corners or edges, helping maintain alignment. Because height and mounting interface are clearly defined, the legs can be planned into new builds with predictable clearances from floor to underside of the top and predictable screw positions in the substrate.

Using Rockwell Legs In Work Surface Projects

Where These 2-3/8 Inch Legs Fit Best

The 2-3/8 inch diameter of the Rockwell table leg set defines a round support that suits a wide range of work surface and table projects where a moderate column size is desired. Positioned within the Work Surface & Tables category, these legs align with shop tables, counters, or similar structures that rely on discrete legs instead of casework for support. The 34-1/2 inch height sets the basic structure at a level commonly associated with counter-style working heights, so surfaces can be configured for standing tasks. The black matte finish keeps the visual impact low under darker or industrial-style tops, allowing the surface material to remain the focus while the understructure stays subdued. Because the mounting plate is square and sized at 4 9/16 inches, the legs can be located toward corners of rectangular tops with a known footprint, aiding layout in repeat builds.

Adjustment And Mounting For Repeatable Results

The Rockwell table leg set incorporates a 1 1/8 inch adjustable foot, which provides vertical correction at each leg and helps compensate for floor variation so the work surface contacts all four supports. That adjustment range allows installers to bring the top into plane without altering the fixed structure of the leg or the mounting plate. The 4 9/16 inch (116mm) square mounting plate establishes a repeatable template for fastener placement on the underside of tops, so production runs or multi-station layouts can share the same drilling pattern. The consistent square plate shape simplifies orienting legs relative to edges for uniform overhangs and clearances. Identifying the product by manufacturer part number 960-34-02 ties all of these mounting and adjustment characteristics to a single recurring spec, supporting future replacements or matching additional stations to an existing installation.

Common Questions About Rockwell Table Leg Set

Selecting This Rockwell Leg Set For Your Build

The Rockwell table leg set from Peter Meier, Inc. combines a 34-1/2 inch height, 2-3/8 inch diameter, and black matte finish, so it aligns with many counter-style work surfaces where visual restraint and stable support are desired. The 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot give defined interfaces at both the top and floor, helping align structural layout with real jobsite conditions. For projects classified under Work Surface & Tables that call for table legs instead of casework, this 960-34-02 configuration provides a consistent Rockwell specification that can be repeated across builds or added to existing Rockwell-based layouts.