2-3/8" Diameter x 34-1/2" High Rockwell Table Leg Set, Brushed Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set identifies a Peter Meier, Inc. leg system designed for work surface and table projects where a consistent support solution is needed. The 2-3/8 inch diameter round steel legs provide a substantial footprint, which helps distribute load across the floor in a typical shop or residential setting. The 34-1/2 inch high leg dimension sets a base height that aligns with common table and work surface applications, giving installers a predictable starting point when planning overall top height. The brushed steel finish offers a neutral, professional look that works in many shop, office, or residential environments. These legs are classified in the work surface and tables category, so they are intended for use as primary vertical supports rather than light-duty trim parts. The set is sold under manufacturer part number 960-34-ST, which helps match specifications across drawings and ordering.

Key Rockwell Table Leg Details For Projects

• The 2-3/8 inch diameter round profile gives each leg a solid bearing area against the floor, which helps support typical work surface or table loads without concentrating pressure in a small point.
• The 34-1/2 inch high leg length establishes a standard base height for table installations, which simplifies layout when coordinating with chairs, cabinets, or adjacent work surfaces designed around similar dimensions.
• The brushed steel finish provides a clean metallic appearance that blends with many laminate, wood, or metal tops, so installers can use a single leg style across different projects without visual mismatch.
• The product is categorized as work surface and tables - table legs, which defines its role as a structural support component in table and work surface assemblies rather than decorative-only elements.
• The leg set is branded by Peter Meier, Inc., giving installers a specific manufacturer reference that supports consistent selection across multiple jobs that rely on the same performance characteristics.

Mounting Plate And Adjustable Foot For Setup

The 4 9/16 inch (116 mm) square mounting plate provides a broad interface area between each leg and the underside of the work surface or table top, which helps spread loads and reduce localized stress around fastener locations. The square geometry also gives clear reference edges when aligning legs parallel to table edges during layout. An adjustable foot with 1 1/8 inch of travel is built into each leg, allowing installers to fine-tune final height within that range to address minor floor irregularities or to match existing surface heights. This adjustment range helps achieve solid contact at all support points, which is important for reducing rocking under normal use.

How These Table Legs Fit Real Installations

Using Rockwell Legs On Work Surfaces

This Rockwell table leg set is categorized under work surface and tables, so it is intended for use as vertical support on tables, counters, and similar surfaces in woodworking, office, or residential environments. The 34-1/2 inch leg height positions the surface at a typical table level once a top thickness is added, which helps align new work surfaces with standard furniture heights. The 2-3/8 inch diameter steel construction creates a substantial column, which supports typical shop, office, or residential table loading patterns across its footprint. The brushed steel finish works well where a visible leg is expected, such as open table bases or freestanding workstations, and it coordinates with many hardware and appliance finishes in kitchen or office layouts.

Details That Support Level, Repeatable Results

The 4 9/16 inch square mounting plate gives installers a predictable interface size for layout, so hole patterns and edge setbacks can be repeated across multiple tops for consistent production. The square shape makes it straightforward to align each leg with table edges or cabinetry, supporting clean lines in finished installations. The 1 1/8 inch adjustable foot range allows height tuning within that band, which helps achieve solid multi-leg contact even when floors vary slightly from flat or when tops differ slightly in thickness. Because the set is identified by manufacturer number 960-34-ST, shops can specify this exact configuration on drawings and purchase lists, which supports repeat builds and service replacements that need to match existing installations in height and appearance.

Common Questions About Rockwell Table Leg Fit

Select This Rockwell Leg Set For Work Surfaces

The 2-3/8 inch diameter x 34-1/2 inch high Rockwell table leg set from Peter Meier, Inc. offers a defined combination of leg height, 4 9/16 inch square mounting plate, and 1 1/8 inch adjustable foot that suits many table and work surface builds. The brushed steel finish and standardized dimensions let shops and installers specify part 960-34-ST when they need a repeatable support solution across multiple projects. For new work surfaces, counters, or tables planned around this height range, this leg set provides a consistent structural base and adjustment range that supports straightforward layout and installation.