2-3/8" Diameter x 34-1/2" High Rockwell Table Leg Set, Chrome, 4/Set
Description
Rockwell Table Leg Set For Stable Work Surfaces
Rockwell table leg set from Peter Meier, Inc. provides a matched group of four chrome table legs designed for work surfaces and tables. The 2-3/8 inch diameter steel legs create a substantial support profile, which helps distribute load across a larger footprint. Each leg stands 34-1/2 inches high, giving a base height suited to many table and work surface builds before foot adjustment. The chrome finish delivers a clean, uniform appearance across the set, which supports visually consistent installations in open-plan or client-facing spaces. As part of Wurth Baer Supply's work surface and tables offering, this table leg set fits directly into woodworking and shop build workflows. The matched set approach simplifies planning because all four legs share identical height, diameter, and adjustment capability.
Key Rockwell Table Leg Details For Builders
- The 2-3/8 inch diameter legs present a thick, rigid profile, which supports stable tables when fastening into solid tops or frames.
- The 34-1/2 inch leg height establishes a consistent reference height, which helps keep multiple work surfaces aligned during layout.
- The chrome finish gives the legs a smooth, reflective surface, which suits applications where exposed supports must look clean and professional.
- The Peter Meier, Inc. brand ties the legs to an established hardware maker, which supports matching these legs with other components from the same source.
- The table legs are categorized for work surfaces and tables, which aligns them with shop benches, utility tables, and similar projects.
Mounting Plate And Foot Adjustment For Fit
The 4-9/16 inch (116 mm) square mounting plate on each Rockwell table leg creates a wide fastening area, which helps spread forces into the underside of the top and reduces stress at the connection. The plate layout gives installers a clear zone for placing fasteners at the corners, which can speed repetitive installations across multiple tops. Each leg also has a 1 1/8 inch adjustable foot, which allows fine height tuning after the legs are mounted. That adjustment range helps compensate for minor floor variations so the finished table can sit level without shimming the structure. Together, the square plate and adjustable foot support straightforward mounting and on-site leveling for work surfaces and tables.
Using Rockwell Table Legs In Real Projects
Where This Adjustable Table Leg Set Fits Best
The Rockwell table leg set is classified under work surface and tables, so it aligns naturally with shop benches, utility tables, and general workstations. The 34-1/2 inch starting height places the legs in a range suitable for many task-oriented surfaces once the 1 1/8 inch adjustable foot is set, allowing installers to dial in a final working height. The 2-3/8 inch diameter legs provide a solid visual and structural presence, which works well under deeper or heavier tops often used in woodworking or fabrication environments. The chrome finish lets these legs integrate into applications where under-table components remain visible, such as open office tables or customer-facing counters. With four matched legs in the Rockwell table leg set, builders can support a rectangular work surface at all corners using identical components.
Details That Support Level, Repeatable Installations
The 4-9/16 inch (116 mm) square mounting plate on each leg defines a consistent fastener footprint, which helps installers repeat the same pattern across multiple tops for uniformity. That fixed plate size also aids layout when marking underside hole positions, because installers can work from the same edge offsets every time. The 1 1/8 inch adjustable foot on each leg gives meaningful vertical travel, which helps bring all four corners of a table into the same plane even on uneven floors. By adjusting the feet rather than trimming leg tubes or altering tops, installers can correct minor variances late in the process while protecting finished surfaces. The combination of a substantial 2-3/8 inch diameter tube, square mounting plate, and adjustable foot in this Rockwell table leg set supports stable, level, and repeatable work surface construction.
Common Questions About Rockwell Table Leg Set
What height table can this Rockwell table leg set support?
The Rockwell table leg set uses 34-1/2 inch high legs with a 1 1/8 inch adjustable foot, so builders can fine-tune final table or work surface height around that starting dimension.
How does the 4-9/16 inch square mounting plate help installation?
The 4-9/16 inch square mounting plate spreads loads across a wider area under the top, which supports a solid connection and repeatable fastener layouts on multiple surfaces.
Why is the 2-3/8 inch leg diameter important for work surfaces?
The 2-3/8 inch diameter gives each leg a larger cross-section, which supports a sturdier feel and helps resist flex under typical work surface and table loads.
What role does the chrome finish play on these Peter Meier legs?
The chrome finish on the Peter Meier table legs provides a uniform, reflective surface, which suits visible installations where the support structure contributes to the overall look.
How does the 1 1/8 inch adjustable foot affect leveling?
The 1 1/8 inch adjustable foot on each leg allows on-site height changes, which helps installers level tables on uneven floors without altering the leg tubes or tops.
What applications match this Rockwell table leg set category?
The Rockwell table leg set is categorized for work surface and tables, aligning it with shop benches, utility tables, and similar task-focused workstations.
Selecting This Rockwell Set For Your Next Build
The Rockwell table leg set from Peter Meier, Inc. pairs 34-1/2 inch high, 2-3/8 inch diameter chrome legs with a 4-9/16 inch square mounting plate and 1 1/8 inch adjustable foot, giving installers defined dimensions and adjustment capability for work surface and table projects. Using this matched set through Wurth Baer Supply allows builders to plan around known sizes and finishes across multiple installations.