2-3/8" Diameter x 34-1/2" High Rockwell Table Leg Set, Stainless Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set from Peter Meier, Inc. provides four matching stainless steel legs designed for table, counter, and bar height work surfaces, giving fabricators one consistent solution across multiple heights. The 2-3/8 inch diameter construction creates a solid support point at each corner, which helps the top feel firm when people lean or work on the surface. Each leg stands 34-1/2 inches high, so it suits projects targeting counter-height layouts where alignment with adjoining cabinets matters. The set is identified by manufacturer part 960-34-SS, allowing shops to reorder the same leg style when repeating successful installations. Stainless steel material offers a clean metal look that fits commercial and residential environments. Used as part of a work surface and tables hardware package, this table leg set helps installers create uniform, professional-looking support under tops.

Key Rockwell Table Leg Details For Projects

• The stainless steel construction provides a rigid metal support leg, which helps the work surface feel stable in everyday use.
• The 2-3/8 inch diameter shape spreads the load across a wider tube, supporting heavier use points at table or counter corners.
• The 34-1/2 inch leg height matches common counter-height layouts, helping the finished top line up with surrounding cabinetry or adjacent work areas.
• The 1 1/8 inch adjustable foot offers height adjustment, which helps installers compensate for uneven floors and fine-tune level across multiple legs.
• The 4 9/16 inch (116mm) square mounting plate creates a broad attachment area to the underside of the top, improving connection strength and reducing rocking.

Mounting And Height Adjustment For Rockwell Legs

This Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate, giving installers a defined footprint when laying out screw locations on the underside of the work surface. The plate shape helps position each leg consistently at corners or support points. Each leg incorporates a 1 1/8 inch adjustable foot, which allows the overall height to shift within that range. That adjustment helps align the finished surface when floors vary slightly in height between leg positions. With a nominal leg height of 34-1/2 inches, the legs land in the counter-height range, so adjusting the foot fine-tunes final elevation relative to nearby counters or appliances. The stainless steel leg body and fixed plate geometry simplify repeating the same layout across multiple similar projects.

Using Rockwell Legs In Work Surface Layouts

Where Rockwell Table Leg Set Works Best

The Peter Meier, Inc. Rockwell table leg set belongs in work surface and tables projects where a metal leg is preferred over a panel support. Its 34-1/2 inch height targets counter-height installations, so it suits kitchen-style counters, shop benches, or service counters that share that working level. The 2-3/8 inch diameter profile fits well under deeper tops, where a thinner leg might look undersized relative to the surface. Because the legs are stainless steel, they integrate visually with other stainless elements in a space, such as appliances or metal trim. The 4 9/16 inch (116mm) square mounting plate gives enough bearing area to anchor into a variety of top materials where a flat underside is available for mounting. Across table, counter, and bar height offerings, the Rockwell line supports coordinated projects needing different heights.

Details That Support Repeatable Counter Installations

The 1 1/8 inch adjustable foot on each Rockwell leg plays a central role in dialing in a level work surface. When floors fall out of plane, the adjustment range allows installers to bring all leg contact points into alignment without altering the leg body. The consistent 2-3/8 inch diameter provides a predictable setback reference from the edge of the top, helping layouts look uniform from job to job. Using the defined 4 9/16 inch (116mm) square mounting plate, shops can create templates or jigs for drilling pilot holes, which speeds production when multiple tops use the same pattern. The 34-1/2 inch nominal height, combined with the adjustable foot, creates a usable band around standard counter height, so fabricators can fine-tune to match existing cabinetry runs. With part number 960-34-SS, reordering the same leg ensures future replacements or additions maintain the same visual and dimensional characteristics.

Common Questions About Rockwell Table Leg Set

Choose Rockwell Legs For Counter-Height Projects

The Peter Meier, Inc. Rockwell table leg set from Wurth Baer Supply combines stainless steel construction, a 2-3/8 inch diameter profile, and 34-1/2 inch height to support counter-level work surfaces. The 1 1/8 inch adjustable foot and 4 9/16 inch (116mm) square mounting plate give practical tools for leveling and layout. For projects where table, counter, and bar heights share one visual family, this Rockwell table leg set provides a consistent foundation that supports clean, repeatable installations.