2-3/8" Diameter x 34-1/2" High Rockwell Table Leg Set, Aluminum Silver, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set from Peter Meier, Inc. is a 2-3/8 inch diameter x 34-1/2 inch high aluminum silver table leg solution that supports work surface and table projects where a consistent finished height matters. The table legs are classified under work surface and tables, so they are suited to building or upgrading fixed work areas rather than light decorative stands. The manufacturer part number 960-34-71 identifies this specific Rockwell leg configuration, which helps match existing installations using the same series. The aluminum silver finish provides a clean, neutral look that coordinates with many top materials in shop, office, or residential settings. The 34-1/2 inch height establishes a base for standard table-style applications, giving installers a predictable starting point before any top thickness is added.

Key Rockwell Leg Details That Support Builds

• The 2-3/8 inch diameter cylindrical leg profile provides a substantial support footprint, which helps distribute load across the floor contact point on work surfaces and tables.
• The 34-1/2 inch overall leg height sets a consistent elevation for table-height projects, simplifying layout when matching existing surfaces or planning new workstations.
• The aluminum silver construction and finish deliver a uniform, metallic appearance that works across many cabinet, countertop, and panel styles without demanding color matching.
• The 1 1/8 inch adjustable foot allows fine height adjustment at the floor, which helps compensate for minor floor irregularities when bringing multiple legs into the same plane.
• The 4 9/16 inch (116mm) square mounting plate provides a broad connection interface to the underside of the work surface, improving stability where tops are subject to lateral loads.
• The set format groups four table legs with a shared part number, supporting typical four-corner table or work surface layouts under a single selection.

Mounting And Height Setup For Rockwell Table Legs

The Rockwell table leg set uses a 4 9/16 inch (116mm) square mounting plate at the top of each leg, giving a defined footprint for securing the leg to the underside of a table or work surface. This square plate layout helps installers position legs consistently near corners or support points so loads transfer predictably into the structure. Each leg also incorporates a 1 1/8 inch adjustable foot at the bottom, which offers a useful range to dial in final height without altering the fixed 34-1/2 inch leg tube. That adjustment capability supports on-site leveling when tying into existing counters or when multiple tables must align across uneven floors common in shops and commercial spaces.

Using Rockwell Table Legs In Real Workspaces

Where Rockwell Table Leg Set Fits Best

This Rockwell table leg set is categorized under work surface and tables and table legs, aligning it with applications such as workbenches, shop tables, utility tables, and general work surfaces. The 34-1/2 inch leg height suits projects targeting table-style working elevations once the top thickness is added, so it works well for free-standing surfaces where users sit or stand beside the top rather than at counter or bar distance. The aluminum silver finish integrates cleanly into mixed-material environments, from laminated panels to wood tops, which is useful in woodworking shops and fabrication areas supplied through Wurth Baer Supply. The 2-3/8 inch diameter leg body offers a visually solid support column, which helps tables look substantial in work-focused rooms.

Details That Help Achieve Repeatable Table Results

The 1 1/8 inch adjustable foot on each Rockwell leg supports fine-tuning final height, which is important when tying a new work surface to existing equipment or adjacent tops. That built-in adjustment means installers can respond to slight building variations while still hitting consistent working elevations across multiple units. The 4 9/16 inch (116mm) square mounting plate standardizes how each leg interfaces with the underside of the top, leading to repeatable hole or fastener patterns on production runs. With the manufacturer part number 960-34-71, shops can reorder the same Rockwell configuration with confidence, maintaining uniform material planning and fabrication jigs. The combination of defined leg height, set quantity, and the adjustable foot supports straightforward layout, production, and on-site alignment when building runs of similar tables.

Common Rockwell Table Leg Fit And Use Questions

Select Rockwell Legs For Consistent Work Surfaces

The 2-3/8 inch diameter x 34-1/2 inch high Rockwell table leg set in aluminum silver gives installers a defined, repeatable base for work surfaces and tables. With a 4 9/16 inch (116mm) square mounting plate and a 1 1/8 inch adjustable foot, each leg combines a clear attachment interface with on-site leveling flexibility. The table legs are grouped as a set under Peter Meier, Inc. part number 960-34-71, which supports streamlined planning when multiple work surfaces must share the same height and appearance across a project.