Salice 200 Series self-close overlay hinge is a concealed cabinet hinge designed for both residential and commercial cabinets, so it supports one hinge standard across mixed projects. This hinge is a blind corner type with a cup depth of only 11 mm, which helps it fit cabinet door profiles where deeper cups would risk break-out or extra machining. The hinge opens to 94 degrees, giving enough door swing for typical access while helping keep doors from clashing with adjacent fronts in tight runs. It is an all steel hinge that is nickel plated for corrosion resistance, which helps the hardware hold up in normal kitchen and bath moisture conditions. The hinge is permanently self lubricating using environmentally safe lubricants, so the moving arm stays smooth in long-term use without separate lubrication steps.
This Salice concealed cabinet hinge uses a blind corner geometry, so it is intended for cabinet situations where the door overlays the opening and the interior corner limits full swing. The hinge is available in a Logica tool-free lever activated expanding dowel cup fastening design, which allows the installer to fasten the cup into the 35 mm bore using the integrated dowels instead of separate fasteners. The hinge family also covers screw-on with two #6 x 5/8 inch screws, press-in dowels, and Rapido cam lock dowel configurations, which gives flexibility to match shop boring equipment and preferred fastening style. This hinge is designed to work with all Salice mounting plates, so the arm interface supports existing Salice plate inventories and plate heights when setting overlay and door position.
This Salice C2JBV99 hinge belongs to the Salice 200 Series self-closing overlay face-frame and frameless hinge family, so it can be specified for both cabinet constructions that use Salice mounting plates. It is designed for use in both residential and commercial cabinets, which means it can be applied across kitchens, office casework, and similar cabinet runs under a single hinge line. As a blind corner hinge with a 94 degree opening angle, it suits corner or restricted-swing locations where a wider opening hinge would cause interference with walls or adjoining doors. The cup depth of only 11 mm and 3 mm to 6 mm cup edge drilling distance make this hinge suitable when door thickness, profile rout, or existing boring patterns limit how the cup can be machined. Because the hinge is compatible with Smove soft-close devices, it can be paired with those devices in installations that require soft-closing action while keeping the same hinge geometry.
The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm, controlled at the hinge arm screw, lets the installer shift the door laterally while keeping the hinge geometry consistent, which helps align doors along a run without changing plate positions. The self-closing function, available only in this hinge version, pulls the door shut at the end of travel, which helps cabinet doors stay closed in everyday use without separate catches. Because the hinge is all steel and nickel plated, it provides a robust arm and cup structure with a corrosion resistant surface, which supports long-term hinge function in environments where humidity and cleaning can affect exposed hardware. The permanently self lubricating design using environmentally safe lubricants keeps the hinge motion smooth over time, which reduces service visits related to stiff or noisy hinge operation. Compatibility with all Salice mounting plates means one hinge arm style can work across various overlay and inset setups that rely on those plates, which simplifies stocking and planning for installers who already use Salice systems.
The Salice C2JBV99 is a concealed cabinet hinge from the Salice 200 Series, designed as a self-close overlay hinge for blind corner applications in residential and commercial cabinets.
The hinge offers a 94 degree opening angle, which provides cabinet access while helping avoid door interference in tight corner or adjacent-door layouts.
The hinge has an 11 mm cup depth and a cup edge drilling distance range of 3 mm to 6 mm, supporting use with many door profiles and boring setups.
In the Logica version, the hinge uses lever activated expanding dowels in the cup, which secure into the bored hole without separate fasteners during installation.
The hinge offers patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, which helps align door reveals along a cabinet run.
This hinge is designed to work with all Salice mounting plates, so it integrates with existing Salice plate systems to set the desired overlay and door position.
This Salice concealed cabinet hinge combines blind corner geometry, 94 degree opening, and an 11 mm cup depth, so it supports tight cabinet layouts and varied door profiles. The self-closing function and side-to-side adjustment help deliver clean reveals in everyday use. Compatibility with all Salice mounting plates and Smove soft-close devices lets you standardize on one hinge family across residential and commercial projects while controlling overlay and closing behavior consistently.
Sold In: 150 Each