Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 2021 series delivers its 3/4-extension epoxy roller slide in a 14 inch length — a size built for the shallow drawers and compact cabinet runs where longer slides simply will not fit. This is a standard-motion, non-handed white epoxy slide rated at 100 lb, sold as a complete set for one drawer.
Fourteen inches is the right call when cabinet depth runs shallow — spice pullouts, small bathroom vanity drawers, island end-panel drawers, and built-in bench seating with storage are all candidates. It also works in face-frame cabinet retrofits where the interior depth behind the stile leaves less room than a standard kitchen cabinet. At 100 lb capacity, this slide handles the kind of content a compact drawer actually carries: dense spice collections, bar accessories, or tool-drawer inserts in a shop cabinet that does not have the depth for a longer slide.
Steel members with a white epoxy powder-coat finish make up the FR 2021's construction. The epoxy color is a matching choice, not a structural upgrade — it keeps the slide from drawing the eye when the drawer is open. Nylon roller bearings carry the load quietly along the formed steel tracks. The standard-motion design means there is no closing ramp or damping mechanism to wear out over time; the slide moves as long as the rollers and steel stay intact.
Cabinet shops building compact specialty pieces — bathroom vanities, butler's pantries, and mudroom lockers — often need a short-length option that still carries a respectable load. The 100 lb rating gives specifiers room to work without stepping up to a heavier slide class. The non-handed, complete-set configuration makes this a practical choice for production runs where sorting handed members slows the bench down. Homeowners refreshing a small built-in or replacing a worn-out drawer runner in a shallow piece of furniture will find the 14 inch set straightforward to install with the same 1/2 inch per-side clearance formula that applies across the Euro slide family.
Correct — there is no self-closing ramp on this slide. The drawer rolls freely and rests wherever it stops. If a positive close matters for the application, look at the self-closing version in the Fulterer line.
Plan for 1/2 inch of clearance on each side between the drawer box and the cabinet interior — build the box 1 inch narrower than the inside cabinet opening.
No. The FR 2201 is non-handed; the same set covers both sides of the drawer with no orientation sorting required.
This is a 3/4-extension slide, so the rear portion of the drawer stays inside the cabinet at full open. On a 14 inch slide, expect roughly 10 to 11 inches of travel — not full rear access.
It can, but face-frame installations set the cabinet side back from the face, so rear mounting support is typically needed. Check whether your installation requires rear sockets or brackets and source them separately before committing to the slide.
When a shallow drawer demands a slide that fits, carries a real load, and installs without the complexity of handed members, the Fulterer 14 inch FR 2021 set is the straightforward answer — add it to your cart and keep the build moving.
Sold In: 1 Pair