Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 2021 series 26 inch euro slide is an epoxy-coated, roller-bearing slide for cabinets that demand more depth — non-handed, standard motion, and rated for 100 lb at 3/4 extension in a white finish that disappears against light cabinet interiors.
Most euro slide programs top out at 22 or 24 inches, which is a tight fit for deeper cabinet boxes. The 26 inch FR 2021 handles the drawers that shorter slides cannot: base cabinets with a deep interior, pantry pull-outs, laundry and utility cabinet runs, and island storage where depth is available and used. The non-handed build is a production advantage — one SKU covers both sides of every drawer in the run without sorting or staging left and right stock.
This slide has standard motion, meaning no self-close ramp, detent, or damper. The drawer rolls freely and stays where it is left. That is the right call for applications where a closing mechanism would interfere, such as a pull-out platform that loads and rests open, or a utility drawer where the installer is adding a separate push-to-open mechanism. For drawers where self-closing action is wanted, this is not the slide to specify.
The FR 2021 slides are steel with a white epoxy powder-coat, the standard finish system for euro-style roller slides. The white coating is a functional color choice: it reads as neutral against white or light melamine interiors, so the hardware recedes rather than drawing attention. Nylon rollers run in the steel profiles quietly and without lubrication requirements for normal cabinet use. Side clearance is 1/2 inch per side, so the drawer box runs 1 inch narrower than the cabinet opening — the standard formula for this style of slide.
Cabinet shops building deeper base runs, closet builders specifying pantry and linen storage, and contractors refitting utility rooms will find the 26 inch length fills a gap the more common shorter slides leave open. The 100 lb capacity and non-handed orientation also suit high-volume shop workflows: order one part number, install on both sides, move on. Homeowners doing a deeper-than-average DIY base cabinet build will find the 26 inch size handles what standard euro slides cannot reach.
No. The FR 2021 in this configuration has standard motion — no ramp, detent, or damper. The drawer rolls freely and stays at whatever position it is left.
This listing is for the complete slide set for one drawer. One line item handles one drawer.
This is a 3/4-extension slide. On a 26 inch slide the drawer opens most of its depth, but the rearmost portion stays inside the cabinet at full open — this is not a full-extension slide.
The FR 2021 euro slide suits standard drawer box construction. The side clearance is 1/2 inch per side; build the box 1 inch narrower than the inside cabinet width. Specific drawer side thickness compatibility is not stated in the product data — confirm against the Fulterer FR 2021 installation guide before building unusually thick or thin drawer sides.
Euro roller slides in face-frame cabinets typically need rear mounting sockets to support the back end of the slide where the cabinet side is set back from the frame. Check that compatible rear sockets are available for the FR 2021 series before ordering for a face-frame application.
When the cabinet is deep enough to use a 26 inch slide and the drawer just needs to roll smoothly and hold its weight, the Fulterer FR 2021 delivers that without complexity — white finish, standard motion, non-handed, and rated to carry the load.
Sold In: 1 Pair