Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 2021 series 24 inch epoxy-coated Euro slide is a steel roller-bearing, 3/4-extension, standard-motion slide in white, sold as a non-handed set for side mounting. At 24 inches it is one of the longest lengths in the Euro roller family, making it the go-to choice when the cabinet run is deep and shorter slides simply won't reach.
Most Euro roller slide installations run 18 to 22 inches and fit well in standard base cabinets. When the cabinet is deeper — a full-depth pantry pull-out, a tall utility cabinet, a peninsula base with extra interior room — a shorter slide leaves the back of the cabinet wasted and the drawer unstable. The 24 inch length spans that extra depth, keeps the drawer box properly supported along its full run, and uses the available cabinet interior efficiently.
Because motion is standard on this slide, the drawer rests wherever it is pushed. That is appropriate for deep storage drawers where contents are heavy, the drawer is opened deliberately, and a self-closing ramp would work against the user's workflow rather than with it. Shops building utility storage, pantry bases, or deep linen closet drawers will find the free-rolling action predictable and practical.
Steel members carry a white epoxy powder-coat finish that blends with white and off-white cabinet interiors. Nylon roller bearings keep operation quiet without the added cost of ball bearings. The 1/2 inch side clearance requirement is standard for the Euro roller family: build the drawer box 1 inch narrower than the inside cabinet opening, one half-inch per side, and the slide seats correctly. The slide suits drawer side material from standard 1/2 inch through 3/4 inch thickness.
Because the slide is non-handed, it is symmetrical — each member installs on either side without sorting left from right. That simplicity speeds production runs and eliminates the ordering error of receiving two members of the same hand.
Cabinet shops running deep-box utility or pantry drawers in a white interior will find this slide fits their spec without paying for motion features the application doesn't need. Contractors outfitting laundry rooms, mudrooms, or workshop storage where drawers are heavy and deliberately opened get a reliable, economical slide that handles the load. Designers specifying a clean white interior for deep-box applications can call out this slide knowing the finish will disappear behind the drawer front.
This listing is a non-handed set — one line item covers one drawer. Because the slide is non-handed, both sides are identical, so there is no left or right member to sort.
No. The motion is standard — free-rolling with no ramp, detent, or damper. The drawer stays wherever it is left. If you need a closing ramp, look at the self-closing models in the Fulterer Euro program.
This is a 3/4-extension slide. The drawer travels roughly three-quarters of the slide length, leaving the rear portion inside the cabinet at full open. It does not bring the back of the drawer to the cabinet face.
The slide is 24 inches closed. The cabinet interior must be deep enough to seat the slide fully and allow the drawer box to clear. Allow at least 24 inches of usable interior depth, plus any rear clearance your installation requires.
The slide itself works in face-frame construction, but the rear of the slide will need support — a rear mounting socket or bracket — since the cabinet side is set back from the face frame. Those components are sold separately and are series-specific to the FR 2021 program.
When the cabinet runs deep and standard lengths come up short, the 24 inch Fulterer FR 2021 fills the gap with a clean white finish, a 100 lb capacity, and straightforward free-rolling action — no mechanisms to add cost or complexity where none are needed.
Sold In: 1 Pair