Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 2021 series 28 inch epoxy-coated Euro slide is the full-length option in Fulterer's standard roller slide program, built for deep cabinets and tall drawer boxes that shorter sizes simply cannot reach. It is a steel roller-bearing side-mount slide in white epoxy, unhanded, with 3/4 extension and no closing mechanism — the drawer stays where you leave it.
Most production cabinet work runs on 18 to 22 inch slides, but deep base cabinets, tall pantry drawers, and large utility cases call for more travel support. The 28 inch slide matches deep drawer boxes that would be undersupported on a shorter member, keeping the box tracking true over its full run. It is also a natural fit for shop and storage cabinets where drawers carry tools, hardware, or supplies across a longer interior depth. Because the motion is standard — no self-close, no detent — it works cleanly alongside pull-out shelf applications and drawer retrofits where a ramp or spring would interfere with the intended use.
The FR 2021 series slide is formed steel with a baked white epoxy powder-coat finish over nylon roller bearings. Epoxy is a finish choice, not a structural upgrade: it gives the slide a clean, light appearance that recedes against white melamine or white-painted cabinet interiors rather than standing out as bare metal. The nylon rollers run quietly and without the maintenance concerns of exposed steel bearings in a cabinet environment. Steel construction at the 100 lb capacity level means this is a working industrial-duty epoxy slide, not a light furniture runner.
Cabinet shops building deep base or tall utility cases are the primary audience for this length. At 28 inches, this slide fits the run of a drawer that shorter sizes leave partially unsupported — useful in restaurant equipment cases, shop furniture, and storage millwork where interior depth runs beyond the standard kitchen cabinet. Contractors retrofitting drawer hardware in deep casework will find the unhanded design helpful: one part number handles both sides without tracking left and right inventory separately. Designers specifying white-interior cabinets can call out this slide knowing the finish disappears against the box.
Neither. The motion technology on this slide is standard, meaning there is no closing ramp, spring, or damper. The drawer rolls freely and holds its position. If you want a positive close, look at the self-closing models in the Fulterer Euro line.
This listing is a complete slide set for one drawer — both sides are included in one line item. You do not need to order a left-hand and a right-hand separately.
Build the drawer box 1 inch narrower than the inside cabinet opening. The slide requires 1/2 inch of side clearance per side.
This is a 3/4-extension slide. At full open, the rear portion of the drawer stays inside the cabinet — the drawer does not come all the way out to the cabinet face. If you need the back of the drawer fully accessible, look at full-extension models.
Euro roller slides mounted in face-frame cabinets typically need rear mounting sockets or brackets to support the back end of the slide. Check that the appropriate rear support hardware is on hand before installing in a face-frame case.
A 28 inch drawer box in a 22 inch slide is a compromise — the Fulterer FR 2021 at 28 inches is the fit-right option for deep casework that shorter Euro slides can't properly support.
Sold In: 1 Pair