Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 10 inch over-travel side-mount ball bearing drawer slide from Fulterer, rated 198 lb per pair, finished in zinc. The short slide length combined with over-travel extension makes it the right choice when a cabinet has limited depth but the drawer still needs to clear fully, and the 198 lb rating puts it well above the standard kitchen cabinet class.
Over-travel is the spec that matters when the drawer needs to fully clear an obstruction at the front of the cabinet — a countertop overhang, a thick face frame, or a recessed opening. At 10 inches, this slide suits drawers in bench cabinets, island toe-kick drawers, small shop storage units, and any shallow cabinet where the interior depth rules out a longer slide. The 198 lb capacity means it handles the weight class those drawers often carry: hand tools, small parts bins, hardware organizers, and similar dense loads that would push a standard cabinet slide past its limit.
The slide is cold-formed steel with a zinc finish, the workhorse combination for side-mount ball bearing slides in dry indoor settings. Zinc plating protects the steel members through years of regular use. This is not a decorative finish and it is not stainless — it is a practical, durable coating suited to shop floors, utility rooms, garages, and interior cabinetry. The ball bearings run in formed steel raceways the full length of the slide, so the travel stays smooth as the load accumulates and cycles build up.
Cabinet shops fitting out bench storage, contractors building short utility drawers under a countertop overhang, and DIY builders working with shallow cabinet boxes all benefit from a 10 inch slide at this load rating. The non-handed design keeps ordering simple on a multi-drawer project: one part number, any side. If the drawer sits under a worktop lip or behind a deep face frame and the contents are heavy, the over-travel extension and 198 lb capacity together solve both problems at once. This slide is for dry indoor applications only.
The source data confirms over-travel extension but does not state the exact over-travel distance for this model. Contact the supplier or check the Fulterer series data sheet for the specific extension measurement before building the drawer box.
No. 10 inches is the closed length of the slide. Actual travel is the slide length plus the over-travel distance. Slide length and drawer travel are two different measurements.
Side clearance is not stated in the product data for this model. Fulterer's 100 lb class FR 5000 slides use 1/2 inch per side, but this is a 198 lb rated slide and its clearance requirement should be confirmed against the Fulterer data sheet before sizing the drawer box.
No. The motion technology for this slide is standard, meaning no soft-close damper, no self-close spring, and no hold-in detent. The drawer stays wherever it is left.
No. The slide is non-handed, so both pieces in the pair are identical and fit either side of the drawer.
Side-mount slides in face-frame cabinets need rear support since the cabinet side is set back from the face frame. Rear mounting brackets are typically required and are sold separately; confirm the compatible bracket for this Fulterer model before installation.
When shallow depth and serious weight meet in the same drawer, the 10 inch Fulterer over-travel slide at 198 lb per pair is a straightforward answer — over-travel clears the overhang, the load rating covers the contents, and the zinc-finished steel holds up through daily use.
Sold In: 1 Pair
