Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 28 inch over-travel side-mount ball bearing drawer slide from Fulterer, rated 198 lb per pair, finished in zinc. Where a standard full-extension slide stops at the cabinet face, this one keeps going — the drawer member travels past full extension so the entire drawer clears countertop overhangs and deep face frames.
A plain full-extension slide brings the drawer out to the cabinet face. That works fine when the drawer is flush with the countertop edge, but in a kitchen where the counter overhangs the cabinet by an inch or two, the drawer front hits the overhang before the contents at the back are reachable. The over-travel action on this slide solves that: the drawer member continues past the slide's nominal length, carrying the box clear of the overhang. It earns its place on large utility drawers under worktops, heavy-duty shop benches with a lip, and any install where a standard full-extension slide leaves the back of the drawer inaccessible.
Zinc electroplate is the standard protective finish for side-mount ball bearing slides used in dry indoor environments — cabinetry, shop furniture, office casework, and utility storage. On this slide it covers cold-formed steel members through years of everyday cycling without flaking or corroding under normal conditions. The finish sits beside the drawer box mostly out of sight, so its role is protection rather than appearance. For installations where the slide will be visible — open shelving or a shop bench without a face — the clean zinc tone blends with most steel and hardware finishes.
The 198 lb per-pair rating puts this slide well past the kitchen cabinet class and into territory suited for loaded shop drawers, tool storage, and utility benches. At 28 inches, the slide length is matched to drawer boxes built for deep cabinet runs. Cabinet shops specifying drawer hardware for a workshop build, a commercial kitchen, or a utility room where the drawers carry real weight will find the combination of over-travel and high capacity avoids the two most common field complaints: the drawer that won't open past the counter lip, and the slide that deflects under a loaded box. The standard motion means no closing mechanism to fight if the installation will include a push-to-open front.
The product attributes confirm over-travel, but the exact over-travel distance in inches is not stated in the source data for this SKU. Contact Fulterer or your sales rep to confirm the specific extension length before building the drawer box to a tight overhang clearance.
No. 28 inches is the closed length of the slide. Actual travel is the slide length plus the over-travel distance — the drawer extends beyond the nominal 28 inches. Slide length and drawer travel are separate specs.
Side clearance for this Fulterer series is not stated in the source data. Fulterer's FR 5000-family slides typically require 1/2 inch per side, but confirm with the product spec sheet before sizing the drawer box, particularly at the 198 lb capacity level.
Side-mount slides installed in face-frame cabinets need rear support because the cabinet side is set back from the face frame. Rear mounting brackets are typically required and are sold separately; confirm the compatible bracket for this Fulterer series before ordering.
No. This is a standard-motion slide with no damper, spring, or detent. The drawer moves freely and stays where it is left. If you need damped closing at this capacity range, look at the Fulterer soft-close series or the KV FM soft-close line.
A 198 lb rating and over-travel extension in one zinc-finished, non-handed slide removes two common sizing compromises from the same order — reach past the overhang and carry the load, without switching brands or mixing series.
Sold In: 6 Set
