Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 12 inch side-mount ball bearing drawer slide from Fulterer, rated 198 lb and built with over-travel action that carries the drawer past the cabinet face. The zinc finish puts a hardworking, low-profile look on a steel slide designed for shop drawers, utility cabinets, and any application where both serious capacity and full drawer access matter.
Over-travel is the right specification when the drawer cannot stop at the cabinet face and be useful. Under a countertop overhang, behind a thick face frame, or in a worktop cabinet where the back of the drawer needs to clear completely, the extra travel makes the difference between digging for the rear contents and having them in plain reach. At 12 inches of nominal length, this slide fits shallow cabinets and compact tool stations where a longer slide would not — and the 198 lb capacity means the drawer can be packed full without approaching the rating. This is a standard-motion slide: no detent, no spring, no damper. The drawer stays wherever it is left, which suits shop and utility installs where motion features would interfere.
The members are cold-formed steel with an electroplated zinc finish. Zinc is the working standard for side-mount ball bearing slides in indoor environments: it resists the light corrosion that comes from shop humidity and daily handling without adding visual weight to the installation. This is not a stainless or decorative finish, and it is not rated for wet or outdoor use. In the cabinet, the slide sits beside the drawer box and is mostly out of sight when the drawer is closed.
This slide is the right tool for cabinet shops and contractors building heavy-duty shop furniture, utility storage, or workbench pull-outs where 100 lb cabinet slides are not enough. The compact 12 inch length suits shallow base units, upper shop cabinets, and drawer stacks under benches with limited depth. Homeowners building a serious garage cabinet or workshop storage unit will find the 198 lb capacity and over-travel equally useful. The non-handed design simplifies ordering for anyone running a volume build: one SKU covers every drawer position in the cabinet.
No — 12 inches is the closed slide length. Over-travel means the drawer actually travels past that length, pulling the box beyond the cabinet face. The exact over-travel distance is not stated in the available source data.
Standard motion means no closing mechanism: no soft-close damper, no self-close spring, and no hold-in detent. The drawer stays at whatever position it is left. This is intentional on heavy-duty utility slides where a forced close could interfere with the application.
Side-mount ball bearing slides in this class nominally require 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to leave room for both slides. Confirm the exact tolerance against the Fulterer installation spec for this series before sizing the box.
No. The slide is non-handed — both slides in a pair are identical. Order the quantity your drawer count requires without worrying about left/right orientation.
Side-mount slides installed in face-frame cabinets need rear support at the back of the slide. Rear mounting brackets for this Fulterer series are sold separately; check that the brackets you select are matched to this slide before ordering.
The 198 lb capacity and over-travel action in a 12 inch zinc slide cover the drawer applications that standard cabinet hardware cannot — compact, heavily loaded, and needing full access past the cabinet opening.
Sold In: 1 Pair
