Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba DynaSlide 22 inch side-mount ball-bearing slide delivers over-travel extension with a hold-in feature, giving loaded shop, commercial, and utility drawers the reach they need and the detent that keeps them from drifting back open. Sold as a pair.
Over-travel is the right choice whenever a drawer sits behind a countertop overhang, a thick face frame, or a bench apron that would otherwise block rear access at full extension. With this slide, the drawer clears the obstruction entirely, so a loaded parts bin, a deep tool drawer, or a heavy file box is reachable from front to back. At 100 lb per pair, the DynaSlide handles the kinds of loads that shop cabinets, commercial millwork, and utility carts routinely see — loads where a standard 75 lb kitchen slide would be undersized.
Steel members and a zinc finish are the DynaSlide's working materials. The zinc plating resists corrosion in the dry, indoor environments these slides are built for. Ball-bearing raceways run the full member length, keeping movement precise and reducing side play even as the drawer approaches 100 lb. The non-handed design means the pair goes together without sorting left from right, which matters when you are installing a run of cabinets or restocking a shop.
Cabinet shops building commercial casework, garage and shop organizers specifying heavy utility drawers, and contractors fitting out service areas are the primary buyers of this slide. The hold-in detent adds value anywhere a drawer gets slammed shut repeatedly or sits in a mobile cabinet that vibrates — the detent catches the drawer at closed without requiring a deliberate lock. The 22 inch length suits mid-depth shop and commercial cabinet boxes, and the over-travel means rear storage is never blocked by the frame or the bench above.
No. The hold-in detent resists drift and stops the drawer from bouncing back after a firm close, but it releases with a normal pull. It is not a positive lock-in or lock-out; for a latching mechanism that requires a deliberate release, look at a lock-in/lock-out slide.
Per pair, which is the standard basis for drawer slide ratings. One pair of DynaSlides carries 100 lb total.
Side clearance for the DynaSlide series is not confirmed in the available data. Size your drawer box conservatively and verify the clearance requirement against the US Futaba specification sheet before finalizing the box width.
No. Motion is hold-in only — a detent at the closed position. There is no damper, so the drawer does not slow before closing. The hold-in catches it after it is shut.
Yes, with the appropriate rear mounting support. Face-frame installations require rear mounting brackets or a face-frame-specific installation method to support the back end of the slide; those brackets are not included with the slide pair.
Put the DynaSlide 22 inch over-travel pair where a standard full-extension slide would leave the rear of the drawer trapped behind a frame or overhang — and where 100 lb of per-pair capacity with a hold-in detent keeps the job moving without a second-guess on load rating.
Sold In: 1 Set
