Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Blum MERIVOBOX cabinet profile set for 350mm (14 inch) drawer depths, bringing full-extension travel and a 40 kg (88 lb) load rating to the MERIVOBOX drawer system. The profile is zinc-plated steel with integrated soft-close, and the set includes both the left-hand and right-hand cabinet members.
The 350mm nominal length suits cabinets where depth is limited: narrow base cabinets in galley kitchens, island end panels with shallow interiors, bathroom vanity drawers, and utility cabinets where the run from face frame to wall is tight. Full extension at this length means the drawer box clears the face completely — every inch of the box is reachable — which matters most when the drawer is short and interior space is already at a premium. Soft-close closing keeps contents from shifting on contact, which is a practical advantage in drawers holding small hardware, cosmetics, or bath accessories.
The cabinet profile is formed steel, zinc-plated, matching the MERIVOBOX family's standard finish palette. The zinc surface coordinates with other MERIVOBOX components ordered in the same finish. Soft-close is integrated directly into the runner rather than relying on a separate add-on damper, so the motion characteristic is consistent across the drawer's load range. The profile set covers both the left and right cabinet members, so a single order per drawer keeps the build moving.
Cabinet shops specifying MERIVOBOX throughout a kitchen or bath project will reach for the 350mm profile wherever the cabinet depth calls for it — typically alongside longer profiles in the same system for deeper runs. Designers laying out compact or multi-function spaces benefit from a full-extension profile at this shorter length because it avoids the compromises of a 3/4-extension slide in a shallow box. Installers appreciate the left-and-right set format: no separate handedness ordering, no risk of pulling two of the same side.
This is the cabinet member set — the runners that mount inside the cabinet. You still need the MERIVOBOX drawer side profiles (sold separately) to complete the drawer. The cabinet members and drawer members must be the same nominal length and system series.
The nominal length is 350mm (14 inches) — the system's designation for this profile size. Your cabinet must have enough depth to accommodate the profile plus the clearance Blum specifies for MERIVOBOX installations. Check the MERIVOBOX installation guide for the minimum cabinet depth at this nominal length.
The soft-close damper is integrated into the profile and operates across the drawer's load range up to 40 kg. The damping is built into the cabinet member, so it engages on every close regardless of what the drawer is carrying.
Plain push-to-open and integrated soft-close conflict on standard profiles. If the project calls for handle-less fronts with push-to-open, look for a MERIVOBOX TIP-ON BLUMOTION configuration that combines both functions in one engineered unit rather than adding a mechanical ejector to this profile.
MERIVOBOX cabinet profiles are designed for frameless (32mm grid) installation. Face-frame cabinet work typically requires rear mounting brackets or a face-frame adapter. Confirm the mounting approach for your cabinet construction before ordering accessories.
Matching the correct nominal length to the cabinet depth is the step that holds a MERIVOBOX build together — a 350mm cabinet profile paired with 350mm drawer sides and the corresponding front fixings produces a drawer that installs cleanly, closes quietly, and opens to its full depth every time.
Sold In: 8 Set
