Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 500mm (20 inch) cabinet profile set for Blum's MERIVOBOX metal drawer system, including both the left-hand and right-hand cabinet members. The profiles mount to the cabinet interior and form the fixed half of the MERIVOBOX running gear, providing full-extension soft-close travel for a complete system drawer.
In the MERIVOBOX platform, the cabinet profile is the runner that stays fixed to the cabinet wall — the drawer member attaches to the drawer box and rides on it. Getting the cabinet profile in place first, level and at the correct height, is what determines how the finished drawer hangs and adjusts. These profiles carry the integrated soft-close damper that slows the drawer as it closes, so no separate damper accessory is needed. The full-extension design means the drawer box clears the cabinet face completely, giving unobstructed reach to items at the back — a meaningful difference from a 3/4-extension runner in a deep pantry or tool drawer.
The profiles are formed steel with a zinc plating that resists the light moisture and cleaning products typical of kitchen and bath casework. Steel construction keeps the profile rigid under the 70 kg rated load, and the double-walled MERIVOBOX side design means the running gear is integrated rather than surface-mounted. The zinc finish coordinates with the MERIVOBOX system's standard hardware and interior palette.
Cabinet shops running MERIVOBOX as their production drawer system will reach for this profile whenever a drawer position calls for 500mm depth. The set suits kitchen base cabinets, bathroom vanities, and closet casework where a quieter close and full drawer access are part of the spec. Designers specifying a handle-less or push-to-open kitchen should note that MERIVOBOX supports Blum's TIP-ON mechanical push-to-open system — but that component is sold separately and must be matched to the MERIVOBOX platform. These profiles are the cabinet-side members only; completing a working drawer requires the matching MERIVOBOX drawer members, front fixing brackets, and a drawer box built to Blum's cutting dimensions for the 500mm nominal length.
No. This set covers the cabinet-side members — left and right. You still need the MERIVOBOX drawer members, front fixing brackets, and a drawer box built to Blum's specification for this nominal length. All components must come from the MERIVOBOX system.
No. MERIVOBOX components are specific to the MERIVOBOX platform and do not interchange with LEGRABOX, TANDEMBOX, or any other Blum drawer system.
The 70 kg (155 lb) rating is per pair — meaning both cabinet members together supporting one drawer. That is the working load for the installed drawer position.
MERIVOBOX is primarily a frameless (32mm grid) system. Face-frame installation may require additional rear mounting hardware specific to the MERIVOBOX platform; confirm the mounting requirements against Blum's installation documentation for face-frame applications before ordering.
A correctly mounted cabinet profile set is what every other component in the drawer position builds from — get these in level and plumb, and the front adjustment, soft-close travel, and load rating all perform as specified.
Sold In: 8 Set
