Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum MERIVOBOX cabinet profile is the structural side member for an 18 inch (450mm) drawer system installation, supplied as a left-hand and right-hand matched set. It integrates soft-close directly into the runner and carries a 40 kg (88 lb) capacity, making it the working core of a production-ready MERIVOBOX drawer.
The 450mm (18 inch) nominal length targets medium-cabinet-depth applications: standard base cabinets in the 21-to-24-inch-deep range where the cabinet leaves adequate clearance behind the drawer box, island drawers, and desk pedestals. It is the most common size for upper-tier kitchen drawer banks where the drawer runs front-to-back under a countertop. Full extension means the entire box clears the face frame or door plane when opened, so nothing hides at the back of the draw. If your cabinet runs shallower than this or deeper, other MERIVOBOX nominal lengths are the right match — nominal length and cabinet depth must correspond to the MERIVOBOX cutting formula, not to a generic slide-length rule.
MERIVOBOX sides are formed steel profiles with the characteristic double-walled construction that hides fasteners and presents a smooth face inside and out. The zinc-plated finish coordinates with the MERIVOBOX color program and resists surface corrosion in normal interior environments. Soft-close is built into the runner rather than clipped on afterward, so there is no separate damper to source, position, or replace. The 40 kg rating is stated per drawer (the standard MERIVOBOX rating for this series), and it applies to the dynamic working load — everyday use with drawers loaded to capacity.
Cabinet shops running MERIVOBOX as their standard production platform will recognize this 450mm profile as the right depth for most base-cabinet drawer banks. Kitchen designers specifying handle-less or soft-close interiors can pair this profile with MERIVOBOX front fixings and AMBIA-LINE interior organization components for a complete, coordinated drawer package. Installers working on desk and office furniture benefit from the matched left-and-right set, which arrives ready to drop into a frameless or face-frame opening without sorting through bulk packs for pairs. Homeowners upgrading a cabinet shop-built unit to soft-close should confirm the existing drawer box was built to MERIVOBOX specifications before ordering replacement profiles.
Yes. The orientation attribute lists both left hand and right hand, so one set covers one drawer opening — a matched pair.
Soft-close is integrated into the MERIVOBOX runner. No separate damper component is needed or available as an add-on for this system.
No. MERIVOBOX front fixings, rear brackets, and cover accessories are platform-specific and do not interchange with LEGRABOX or TANDEMBOX parts, even when lengths match.
The drawer box — bottom, back, and any wood sides — must be built to Blum's published MERIVOBOX cutting dimensions for the 450mm nominal length. A box built to a generic side-mount slide spec will not seat correctly in this system.
As a set — left hand and right hand together. One purchase equips one drawer.
Pair this 450mm cabinet profile set with the matching MERIVOBOX front fixings and a box built to specification, and the drawer installs with integrated soft-close and 40 kg capacity already in place — no separate damper to add, no sorting for handedness.
Sold In: 8 Set
