Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 600mm (24 inch) cabinet profile set from Blum's MERIVOBOX drawer system, available in left-hand and right-hand members, with integrated soft-close and a 40kg (88 lb) weight capacity. It is the structural runner that mounts inside the cabinet and carries the drawer through its full range of travel.
A 600mm nominal length suits base cabinets and pantry towers with 24 inch interior depths — a common dimension in production kitchen work and custom cabinetry alike. Full extension is the right choice whenever the cabinet design calls for unrestricted access to the back of the drawer: pots-and-pans drawers, deep utensil storage, and pantry pull-outs where reaching to the rear matters. The 40kg capacity means there is no need to downgrade the system for heavier contents; a drawer loaded with cast iron or stacked dishware stays within rating without calculation.
Because this is a cabinet member (the runner that mounts to the cabinet side rather than the drawer box itself), it pairs with the matching MERIVOBOX drawer member and front fixing components to complete the drawer. Cabinet members and drawer members must come from the same MERIVOBOX nominal length; do not mix lengths within one drawer.
The profile is formed steel with a zinc plating, which provides the corrosion resistance appropriate for interior kitchen and bath casework environments. Zinc-plated steel carries the structural load across the full extension cycle without flex, keeping the drawer tracking straight under load. The soft-close damper is integrated into the profile rather than clipped on afterward, so the closing action is consistent and does not depend on a separately sourced component staying in place over time.
Cabinet shops running MERIVOBOX as their production drawer system reach for the 600mm profile when the cabinet box depth calls for it — long enough for a deep base cabinet, rated for the heaviest residential and light commercial drawer contents. Designers specifying MERIVOBOX for a kitchen renovation can call out the 600mm length for every deep base cabinet and know the soft-close and capacity specs hold across the whole project. Contractors replacing a damaged cabinet runner on an existing MERIVOBOX installation need the correct nominal length and handedness — this listing covers both orientations, so the right member ships with the order.
The cabinet member mounts inside the cabinet box on the cabinet side wall. The drawer member attaches to the drawer box itself. Both are required to complete a working drawer; they must come from the same MERIVOBOX nominal length.
One drawer needs a left-hand and a right-hand cabinet member. Order both orientations to equip a single drawer opening.
The damper is integrated into this cabinet profile — no separate soft-close unit is needed. It works as soon as the system is assembled.
No. Cabinet members and drawer members within one drawer must share the same nominal length. Mixing lengths will prevent correct assembly and travel.
MERIVOBOX is primarily designed for frameless (32mm-grid) cabinet construction. For face-frame installations, verify that the appropriate rear brackets or mounting adaptors for the MERIVOBOX system are included in your build.
When the cabinet is deep, the load is heavy, and the close has to be quiet, the 600mm MERIVOBOX cabinet profile covers all three requirements in one component — built from the platform up rather than assembled from unrelated parts.
Sold In: 6 Set
