Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 26 inch full-extension side-mount ball bearing drawer slide from Fulterer, rated 220 lb per pair, with a combined hold-in and hold-out detent that locks the drawer in the closed position and holds it open hands-free. The zinc finish is the standard working finish for this series.
The combined detent system addresses two distinct problems on working drawers. The hold-in feature matters most on shop and garage drawers that take a hard push to close — without it, a loaded drawer rebounds and stays ajar. The hold-out feature matters when the drawer is open and both hands are occupied: a tool tray, a parts bin, or a service drawer that must stay extended while work happens inside it. Together, the two detents mean the drawer goes exactly where it is put and stays there until intentionally moved. This is a standard-motion slide — there is no damper, no spring assist, and no push-to-open mechanism. The drawer moves freely between detent positions.
The slide members are cold-formed steel with a zinc finish. Zinc plating is the segment's standard for indoor corrosion resistance — it is a functional, durable finish suited to cabinets, shop environments, and utility installations where the slide sits beside the open drawer box rather than being hidden beneath it. This finish is not rated for outdoor, wet, or marine environments.
At 220 lb capacity and 26 inches, this slide fits best where the load is real and the drawer is deep: a mechanic's top box, a kitchen base cabinet with a heavy pullout shelf, a workbench drawer loaded with hand tools, or any utility application where standard 100 lb slides have reached their limit. The 3/4 inch side clearance per side is wider than the nominal 1/2 inch used by standard cabinet slides — build the drawer box accordingly, leaving 3/4 inch between each drawer side and the cabinet interior. In face-frame cabinets, rear mounting brackets are required; confirm the matching bracket for this series before ordering, as brackets are series-specific.
Per pair. A single slide is one member of the set; the 220 lb figure is the rated capacity for the two slides working together on one drawer.
No. The hold-out detent keeps the drawer in the open position through spring tension, not a keyed or lever lock. A firm push releases it and begins the return travel. It is a stay-open feature, not a positive lock-out.
Not without rebuilding the drawer box. This slide requires 3/4 inch of side clearance per side — 1/2 inch more total than a standard 1/2 inch clearance slide. A drawer box sized for 1/2 inch clearance will be too wide to fit.
No. This is a standard-motion slide. The hold-in detent keeps the drawer closed once pushed shut, but there is no damper. The drawer does not slow to a controlled close on its own.
No. The slide is non-handed — both pieces in the pair are identical and fit either side of the drawer.
When the drawer needs to stay closed under vibration and stay open under load, this Fulterer 26 inch slide covers both in one non-handed zinc-finished pair rated for serious duty.
Sold In: 4 Set
