Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 32 inch full-extension side-mount ball bearing drawer slide from Fulterer, rated 220 lb per pair, with a combined hold-in/hold-out detent system that keeps the drawer exactly where you put it — closed until pulled, or open until pushed shut. The zinc finish blends into the cabinet interior and stands up to years of indoor service.
A double-detent slide solves two problems at once. The hold-in detent stops a loaded drawer from rebounding open when shut firmly — useful on bench drawers and tool cabinets where contents shift and add closing momentum. The hold-out detent locks the drawer at full open so it stays in position while both hands are in the box. That combination is harder to find than either feature alone, and on a 220 lb rated slide it covers drawers that standard cabinet hardware is not rated for: heavy tool drawers, parts bins, pantry pull-outs loaded with canned goods, and shop storage units that see daily hard use.
Because the slide is full extension, the entire drawer body clears the cabinet face when open. Combined with the hold-out detent, that means the back of a deep 32 inch drawer is both reachable and hands-free accessible.
The slide is cold-formed steel with a zinc finish — the working standard for side-mount ball bearing slides in demanding indoor environments. Zinc plating resists the corrosion that comes from shop humidity and handling; it is a functional, low-profile finish that disappears inside a cabinet. The zinc tone reads as a neutral metallic, which blends easily against light or dark cabinet interiors. This is an indoor slide; it is not rated for exterior, washdown, or marine use.
At 32 inches and 220 lb, this slide is not a standard kitchen drawer pick — it is sized for the builder who needs real depth and genuine load capacity. Cabinet shops outfitting shop-floor storage, contractors building utility rooms or pantry pull-outs, and woodworkers constructing tool chests or workbench drawers will find the length, rating, and detent combination here that shorter, lighter slides cannot provide. The non-handed design simplifies jobsite ordering: one SKU covers both sides of every drawer, with no left-right sorting required. For face-frame cabinet installations, plan for rear mounting brackets to support the slide's back end; those brackets are sold separately and are series-specific.
A normal push closes the drawer and releases the hold-out detent. It is a mechanical catch, not a positive lock — no lever or button required.
Per side. Build the drawer box 1-1/2 inches narrower than the cabinet opening to leave the required 3/4 inch of clearance on each side. This is wider than the 1/2 inch clearance on standard cabinet slides, so check your drawer box dimensions before ordering.
No. The hold-in detent keeps the drawer closed and prevents rebound, but there is no damper. The drawer closes under your control, not on a dampened mechanism.
One pair per order — both slides needed to complete a single drawer installation.
No. This slide is non-handed, so the same part fits the left and right side of every drawer. Order the same quantity as your drawer count.
A 32 inch full-extension slide rated at 220 lb with hold-in/hold-out detents covers the drawers that standard cabinet hardware reaches its limits on — deep, heavy, and needing to stay put in both positions.
Sold In: 4 Set
