Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 40 inch full-extension side-mount ball bearing drawer slide from Fulterer, rated 220 lb per pair, with a combined hold-in/hold-out detent that keeps the drawer parked — closed when shut, open when extended. The zinc finish and all-steel construction make it a practical choice for deep utility drawers, workshop cabinets, and shop storage where the load and the reach both matter.
A 40 inch slide length suits deep cabinets — pantry-depth shop cases, tall storage units, and rolling workbenches where a standard 22 or 24 inch drawer slide would leave half the cabinet depth unused. At full extension, the drawer member travels the full length of the slide, bringing everything stored in the back out to the cabinet face. The hold-out detent keeps the drawer sitting open and stable while both hands are occupied loading, unloading, or working at depth. Pair that with the hold-in detent on the closing side and the drawer stays put in both positions without any spring assist or damper.
Note that this is a standard-motion slide — the detents hold position in both directions, but there is no soft-close damper and no self-close spring. The drawer stays exactly where it is left until intentionally moved.
The slide members are cold-formed steel carrying a zinc finish for indoor corrosion resistance. Zinc is the workhorse finish in this slide class — protective, durable, and unobtrusive in a shop or utility setting where the hardware is functional rather than decorative. At 40 inches, the slide requires 3/4 inch of side clearance per side, so size the drawer box accordingly when planning the build. This clearance is wider than the standard 1/2 inch found on shorter slides in the Fulterer FR 5000 family, and the drawer box width calculation needs to account for it.
The 220 lb rating and 40 inch length put this slide in the range of deep tool drawers, hardware storage cabinets, and large pantry pull-outs where load and depth both exceed what a standard kitchen slide handles. Cabinet shops building deep utility cases, contractors fitting out job-site storage, and homeowners finishing a serious garage workshop will all find the combination of full extension and hold-out useful. The non-handed design keeps inventory simple — one slide number covers both sides of every drawer in the project.
For face-frame cabinet installations, rear mounting brackets will be required to support the back end of a 40 inch slide; confirm bracket compatibility with Fulterer before ordering.
It holds, not locks. The hold-out detent keeps the drawer in the open position until a deliberate push releases it — no lever required, just an intentional push to close.
Confirm the sold-as unit on the product page before ordering; verify whether this SKU ships as a pair or as a single slide.
The 3/4 inch side clearance per side means the drawer box must be 1-1/2 inches narrower than the cabinet opening. Check the maximum recommended drawer width with Fulterer's specification sheet for this series.
No. This is a standard-motion slide with hold-in and hold-out detents. The drawer does not self-close or soft-close — it stays where it is left until moved intentionally.
Side-mount slides installed in face-frame cabinets need rear mounting support at the back of the slide. Rear brackets are not included and are series-specific — confirm the matching Fulterer bracket before building.
When the drawer is deep, the load is real, and both hands need to be free to work, the combination of full extension, 220 lb capacity, and hold-in/hold-out detents in a zinc-finished steel slide does the job without complication.
Sold In: 2 Set
