Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 30 inch full-extension side-mount ball bearing drawer slide from Fulterer, rated 220 lb per pair, with a combined hold-in/hold-out detent that keeps the drawer exactly where you leave it — whether that is closed or fully open.
A standard free-rolling slide leaves the drawer wherever momentum carries it. The dual detent on this slide changes that: push the drawer shut and the hold-in catch keeps it from drifting or bouncing back open under vibration. Pull it all the way out and the hold-out catch holds the drawer at full extension, hands-free, until you push it closed. That combination suits shop benches, utility rooms, and tool storage where you need both hands free while the drawer is open and a drawer that stays closed when the shop door slams.
At 30 inches and 220 lb capacity, this slide is sized for deep storage drawers — tool chests, parts bins, and heavy shop cabinets that would overload a standard 100 lb kitchen slide. Full extension means none of those contents hide behind the cabinet face.
The slide is built from cold-formed steel with a zinc finish. Zinc plating is the working standard for side-mount ball bearing slides in indoor environments: it resists corrosion in dry shop and cabinet conditions and holds up through years of cycling. This is a functional finish on a slide that sits beside the drawer box and is mostly out of view when the drawer is closed. It is not a decorative or stainless finish, and it is not rated for wet or outdoor use.
Cabinet shops building shop furniture, contractors fitting out utility rooms, and serious DIYers tackling heavy storage all land on this slide for the same reasons: the load capacity handles real working weight, the 30 inch length suits deep cabinets, and the hold-in/hold-out detent eliminates drawer drift without adding a closing mechanism that would conflict with direct access. The 3/4 inch side clearance per side is wider than the 1/2 inch standard, so the drawer box needs to be built 1-1/2 inches narrower than the cabinet opening. In face-frame cabinets, add rear mounting brackets at the back of the slide to support the full 30 inch span — brackets for this series are sold separately.
No. The detent is a mechanical catch — it holds the drawer in place at both positions but does not damp or slow the closing action. There is no damper on this slide.
No — 30 inches is the closed length of the slide. Because this is a full-extension model, the drawer member travels approximately the full slide length, bringing the whole drawer out to the cabinet face.
This slide requires 3/4 inch of side clearance per side — wider than the 1/2 inch standard on most side-mount slides. Build the drawer box 1-1/2 inches narrower than the cabinet opening.
No. The slide is non-handed, so both pieces in the pair are identical and either one fits either side of the drawer.
Yes, but a 30 inch slide needs rear support in a face-frame cabinet. Add the matching rear mounting brackets for this series — they are sold separately — to support the back of the slide where the cabinet side is set back behind the face frame.
When the drawer needs to hold its position at both ends of its travel, the hold-in/hold-out detent on this 30 inch Fulterer slide handles that job at a 220 lb load class — so heavy drawers stay closed until you pull them and stay open until you push them.
Sold In: 4 Set
