Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Silentia concealed hinge brings soft-close performance and a Titanium finish to full overlay doors on thick-door face-frame and frameless cabinets, with screw-on mounting and a 40mm cup sized for heavier door stock.
Standard concealed hinges are engineered for doors roughly 16 to 22mm thick. When the door stock runs heavier than that, the cup geometry changes and the standard 35mm bore no longer seats correctly. This hinge uses a 40mm cup with a 52mm boring pattern, the dimensions Salice specifies for its thick-door series, so the hinge seats flush and the arm geometry keeps the door moving without binding against the cabinet front. The 94 degree opening angle is part of that engineering: a thick door needs the tighter swing to clear the cabinet face cleanly, and the restricted angle here is by design, not a shortcoming. The hinge works on both frameless and face-frame cabinets and mounts with screws directly to the cabinet side or stile.
The hinge body is steel finished in Titanium, a warm neutral that reads well against both light and dark door fronts. The Titanium color sits in a different register from standard Nickel, which makes it a natural match when the pulls, knobs, or other visible hardware in a project carry that same tone. Because the hinge is concealed when the door is closed, the finish is most visible during installation and on any open-door view, so a consistent finish across all hardware in the run matters most where doors are frequently left open. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm and minus 1.5mm give enough range to bring doors to an even reveal after the cabinet is set.
Cabinet shops building furniture-grade pieces with thick slab doors, designers specifying a consistent Titanium finish family across a kitchen or bath, and contractors retrofitting heavier doors onto existing frameless or face-frame boxes all have reason to pull this hinge. The screw-on connection is a straightforward, tool-in-hand mount that does not depend on pre-drilled system holes or clip engagement, which simplifies installs on site-built or custom casework where production-line boring is not always present. A compatible Salice base plate, sold separately, is required to complete the installation.
Thick-door hinges use a larger cup because heavier door stock requires a deeper, wider bore to seat the hinge correctly. A standard 35mm cup bored into a thick door will not achieve the proper seating depth, which throws off the arm geometry. The 40mm cup is the right fit for thick-door applications in this Salice series.
Yes. The 94 degree swing is the designed angle for thick-door hinges, where the geometry is calculated to let a heavier door clear the cabinet front without collision. It provides practical access for most kitchen, bath, and furniture applications.
Yes. The hinge arm mounts to a Salice base plate that is sold separately. Plates are brand-specific, so use a Salice plate matched to this series and your cabinet construction.
Titanium is a specific Salice finish name. When specifying a consistent look across a run, confirm that your plates and any other Salice accessories are also ordered in Titanium rather than a similar but distinct finish such as Nickel.
When the project calls for thick doors that close without impact and carry a Titanium finish through the hardware, this Salice Silentia hinge delivers the cup size, arm geometry, and damped close the application needs.
Sold In: 1 Each
