Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Birch edgebanding real wood pre-glued, pre-sanded, unfinished wood pre-glued 0.5mm thick x 13/16 inch width gives cabinetmakers a matched birch edge that is ready for heat application and finishing. The Edgemate real wood veneer construction provides a genuine natural birch edge, so the finished run visually ties in with birch panels on doors, drawer fronts, and casework. Only A quality veneer is used, which supports consistent grain selection along the roll for a more uniform appearance across multiple cabinets. The veneer is expertly matched and sanded to 180 grit, creating a smooth surface that accepts finish efficiently and reduces time spent leveling seams. The veneer is undetectable finger jointed and laminated to a continuous fleece membrane, so long runs can be edged with stable backing that helps the strip track smoothly during application.
This Edgemate edge banding uses hot melt adhesive coating, so the installer activates the glue with heat rather than applying separate adhesive, which simplifies the edging stage and reduces cleanup around cabinets and shelving. The 0.5mm thick profile behaves like traditional thin edgebanding, which supports easy trimming with standard edge trimmers or sharp knives after bonding to the substrate. The continuous fleece membrane backing supports the veneer during application, helping the strip stay aligned along panel edges for straighter reveals. The veneer is expertly matched and pre-sanded to 180 grit, giving a smooth surface that transitions cleanly to the panel face after trimming, which matters when building visible kitchen, bath, or office cabinetry.
This birch edgebanding real wood pre-glued, pre-sanded, unfinished wood pre-glued 0.5mm thick x 13/16 inch width is suited to edging birch-faced panels in cabinetry, shelving, and furniture projects where a matched natural birch edge is required. Only A quality veneer is used, giving grain and color selection that supports visible installations such as kitchen cabinet runs, closet systems, or built-ins. The natural birch face works wherever a clear finish or custom stain is planned, so the same product can be used across multiple areas of a project using birch sheet goods. The 13/16 inch width aligns well with standard panel thicknesses, which supports covering the core edge while leaving a manageable amount for flush trimming on both faces.
The veneer is expertly matched and sanded to 180 grit, which helps produce undetectable joints after trimming and finishing, especially along long cabinet sides and tall pantry runs. Undetectable finger jointing and lamination to a continuous fleece membrane support consistent flexibility and backing stability, so the strip follows panel edges without visible joint interruption. Coating with hot melt adhesive ties the process into standard heat-based edge application, supporting predictable bond performance and limiting extra adhesive steps during production. The 0.5mm thickness and natural birch face allow the edge to blend with birch panels without creating a bulky line, which helps casework look clean from front and side views. Sold in full rolls of 50 feet and 250 linear feet only, the product supports both jobsite-scale work and shop production, so the same specification can serve single-room projects or repeated cabinet runs.
The Edgemate birch edgebanding is 0.5mm thick and 13/16 inch wide, which suits standard panel thicknesses and keeps trimming light while fully covering exposed core edges.
The birch edgebanding is coated with hot melt adhesive, so heat activation bonds the veneer to the panel edge and removes separate glue application from the workflow.
The veneer is expertly matched and sanded to 180 grit, providing a smooth surface that accepts finish efficiently and usually needs only light final sanding at the edge.
The veneer is laminated to a continuous fleece membrane, which supports the thin birch layer during handling and edging, helping it track straight along cabinet or shelving edges.
Only A quality veneer is used, so grain selection and color are suited to visible cabinet edges and help maintain a consistent appearance across connected runs.
This birch edge banding is sold in full rolls of 50 feet and 250 linear feet only, supporting both smaller builds and extended cabinet production runs.
The Edgemate birch edgebanding real wood pre-glued, pre-sanded, unfinished wood pre-glued 0.5mm thick x 13/16 inch width combines A quality veneer, 180 grit sanding, hot melt adhesive coating, and continuous fleece membrane backing to support clean, repeatable edges. For projects using natural birch panels where undetectable joints, straightforward heat activation, and consistent grain presentation are priorities, this edge banding provides a single specification across multiple cabinet, shelving, and furniture applications.
Sold In: 250 Lineal Ft
