Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Cherry edgebanding pre glued from Edgemate is a real wood edge banding designed to finish exposed panel edges with cherry veneer that visually matches surrounding casework. The product uses only "A" quality veneer, so the visible edge presents a high-grade cherry surface that aligns with professional cabinetry standards. The veneer is expertly matched, which supports consistent color and grain flow along long cabinet runs where edge interruptions stand out. The 0.5mm thickness provides a low-profile edge that blends well with typical panel construction while keeping trimming work manageable. The 13/16 inch width gives coverage for common panel thicknesses plus a small margin, which helps during alignment and flush trimming. The material is unfinished, giving control over stain and topcoat so the edge can be finished along with the panel faces for a unified appearance. This setup suits both shop production and careful project work.
This Edgemate cherry edge banding is 13/16 inch wide, giving coverage beyond standard panel thickness and allowing slight overhang on both sides, so trimming flush after bonding is straightforward. The 0.5mm thickness keeps profiling and scraping work light while still providing a true wood surface at the edge. The banding is coated with hot melt adhesive, which activates under heat to bond to the substrate, forming a secure edge treatment without separate adhesive spreading. The continuous fleece membrane backing supports the veneer during heating, trimming, and sanding, helping the banding track straight along the edge and reducing edge cracking during handling. Because the face is pre-sanded to 180 grit in production, final sanding steps before finishing can focus on blending the banding with adjacent surfaces instead of heavy stock removal, which is especially useful along long cabinet sides and shelving.
This Edgemate cherry edgebanding real wood pre-glued, pre-sanded, unfinished strip works well anywhere a cherry veneer edge is required to finish exposed panel edges. The use of only "A" quality veneer means it suits fronts, cabinet sides, and shelving that will be seen directly, not just interior or secondary surfaces. The undetectable finger joints and continuous fleece membrane allow long case sides or tall panels to be edged in continuous runs, supporting a more uniform appearance on bookcases, built-ins, and run-to-run cabinetry. Since the product is unfinished, it can be stained or clear coated along with matching cherry panels, supporting color tuning on kitchen, bath, or office casework using cherry veneers or solids. Full rolls of 50 or 250 linear feet align with shop runs where repeated cabinet parts share the same material.
The pre-glued hot melt adhesive coating on this cherry edge banding means heat alone activates the bond, which standardizes the application process across parts and reduces variability introduced by liquid glue spread rates. The 0.5mm thick veneer trims and flushes cleanly using typical edge banding tools while limiting the risk of heavy edge ridges, supporting smooth transitions between panel face and edge. The 13/16 inch width provides extra coverage beyond typical panel thickness, giving room to register the band over the edge without exposing substrate after trimming. The pre-sanded 180 grit surface reduces scratch pattern differences between the banding and the panel, helping stains and clear finishes lay down more uniformly across the transition. The continuous fleece membrane backing stabilizes the veneer during heating and trimming, which supports predictable tracking around straight edges and lowers the likelihood of edge breakage in handling and finishing stages.
This cherry edgebanding is 0.5mm thick, which keeps the edge profile low while still providing a true wood surface that trims and finishes like standard veneer.
The Edgemate cherry edge banding is 13/16 inch wide, giving coverage beyond common panel thicknesses so the edge can be trimmed back to a clean flush line.
This edgebanding is coated with hot melt adhesive, so heat activation forms the bond, which streamlines application during cabinet and panel edging work.
The cherry veneer is pre-sanded to 180 grit, providing a ready-to-finish surface that accepts stain and topcoats while minimizing additional sanding steps.
This cherry banding uses only "A" quality veneer, giving a clean visible edge that suits fronts, sides, and shelving where the edge stays in direct view.
The veneer is undetectable finger jointed and laminated to a continuous fleece membrane, allowing long continuous runs that maintain visual consistency on large panels.
This Edgemate cherry edgebanding real wood pre-glued, pre-sanded, unfinished strip is suited to projects where cherry veneer panel faces need matching edges. The 0.5mm thickness, 13/16 inch width, and hot melt adhesive coating support steady, repeatable application across cabinet components. Only "A" quality veneer and 180 grit pre-sanding help the finished edge align visually with surrounding cherry surfaces. For runs that demand continuous appearance along sides, shelves, or tall panels, the undetectable finger joints and continuous fleece membrane simplify creating clean, consistent edges from roll to roll.
Sold In: 250 Lineal Ft
