Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White Oak Edgebanding Real Wood Pre-Glued, Pre-Sanded, Unfinished Wood Pre-Glued 0.5mm Thick x 13/16" Width gives you real white oak veneer on your edges, so cabinet and furniture runs keep a consistent wood look from face to edge. The edge banding uses only "A" quality veneer, which supports building visible casework, doors, and shelving where edge detail is part of the finished presentation. The veneer is expertly matched and undetectable finger jointed, helping long runs read as a continuous strip rather than short, patchy segments. That veneer is laminated to a continuous fleece membrane, so the strip stays stable as you feed, trim, and finish it. The banding is unfinished, allowing stain or clear systems to be matched to surrounding white oak parts on the job.
This Edgemate edge banding is coated with hot melt adhesive, so heat activation bonds the 0.5mm thick strip to the substrate, supporting straightforward application on cabinet parts and panels. The 13/16" width gives coverage beyond common panel thicknesses, leaving material for flush trimming and clean final lines. The pre-sanded 180 grit veneer surface means only light touch-up sanding is typically needed before moving to finishing sequences, which helps keep spray and wipe schedules on pace. Because the veneer is unfinished, the same stain or clear system used on the main white oak components can be carried across the edges, supporting consistent color and sheen from run to run.
This Edgemate White Oak Edgebanding Real Wood Pre-Glued, Pre-Sanded, Unfinished Wood Pre-Glued 0.5mm Thick x 13/16" Width is suited to cabinet, furniture, and fixture edges where a real white oak veneer face is required. The 13/16" width allows coverage on standard panel edges with room to trim both faces, which supports tight lines on casework, shelves, and doors. Because the veneer is only 0.5mm thick, it follows minor panel variations while still reading as real wood, which is useful on composite cores. The use of only "A" quality veneer makes it appropriate for visible installations where edge grain is as important as the face, such as open shelving, tall pantry sides, or furniture carcasses. The continuous fleece membrane backing supports these uses by keeping the strip flexible for curves within normal bending ranges while maintaining support behind the veneer.
The pre-glued hot melt coating on this Edgemate edge banding eliminates separate adhesive application, which reduces setup and cleanup steps in edge banding workflows and lowers the risk of squeeze-out on finished faces. Expertly matched, undetectable finger-jointed veneer helps adjacent lengths appear uniform, so splices on tall cabinets and long counters do not draw attention. The 180 grit pre-sanded surface supports strong adhesion of finishes, because the sanding pattern is balanced for most coating systems and reduces time spent leveling edges to surrounding faces. The continuous fleece membrane backing reinforces the thin 0.5mm veneer, which helps it tolerate trimming and light sanding without breaking through. Because the veneer is unfinished, it can be integrated into custom color programs on white oak, supporting consistent matching across doors, drawer fronts, and carcase edges from one project to the next.
This Edgemate white oak edgebanding is 0.5mm thick, which lets it conform well to panel edges while still presenting a true wood veneer face for trimming and finishing.
This white oak edge banding is 13/16 inch wide, providing coverage past common panel thicknesses so you can trim both faces to a clean, flush edge.
This edgebanding is unfinished and pre-sanded to 180 grit, giving a ready-to-finish surface that accepts stains or clear systems matched to surrounding white oak parts.
This Edgemate banding is coated with hot melt adhesive, so heat activation bonds the strip to the substrate and removes separate glue spreading from the process.
This edge banding uses only "A" quality veneer, supporting use on visible cabinet, furniture, and fixture edges where appearance and grain selection are important.
The veneer is laminated to a continuous fleece membrane, which stabilizes the thin 0.5mm veneer and supports cleaner handling, trimming, and light sanding on the edge.
Edgemate White Oak Edgebanding Real Wood Pre-Glued, Pre-Sanded, Unfinished Wood Pre-Glued 0.5mm Thick x 13/16" Width supports real-wood edges on cabinet and furniture work where appearance matters. Sold in full rolls of 50' and 250' linear feet only, it fits shops that want consistent material over multiple panels. The combination of "A" quality veneer, hot melt pre-glue, and 180 grit pre-sanding helps keep edge runs aligned with existing white oak programs while supporting an efficient, finish-ready workflow.
Sold In: 250 Lineal Ft
