Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maple edgebanding pre glued from Edgemate is real wood edge banding designed to finish exposed edges on panels with a maple face. The veneer is unfinished maple, so it can be stained or clear coated to match surrounding maple components in a project. The product uses only A quality veneer, which helps create a consistent grain and color field across cabinet runs, fixture parts, or furniture components. The veneer is 0.5mm thick, giving a low-profile edge that blends closely with typical panel faces in modern casework. The band is 13/16 inch wide, providing coverage for common 3/4 inch panel thickness with a bit of overhang for trimming. This roll length is 250 feet, supporting longer runs or multiple jobs without frequent changeover during edge applications.
This Edgemate maple edgebanding is 13/16 inch wide, sized to cover standard 3/4 inch substrates while leaving slight overhang for trimming flush to the face. The 0.5mm thickness keeps the transition between panel face and edge minimal, helping tools produce a smooth profile after trimming and final sanding. The back is coated with hot melt adhesive, so the installer applies heat to activate the bond along the edge during application. The continuous fleece membrane backing supports the veneer as it is run along MDF or particleboard edges, promoting a uniform bond across the full 250 foot roll length. The pre sanded 180 grit face reduces prep steps before clear coats or stains are applied to match adjacent maple surfaces.
This real wood maple edgebanding is part of Wurth Baer Supply offerings in the Edgebanding & Surfacing category, specifically in Edgebanding, Wood, so it aligns with woodworking and cabinet shop environments. The unfinished maple veneer suits applications where exposed panel edges need to match maple faces, such as cabinet boxes, shelving, and furniture components. With a 13/16 inch width, it fits typical 3/4 inch sheet stock used in casework and architectural millwork projects. The 250 foot roll format supports production settings that run repeated edge operations over many parts. Only A quality veneer is used, and it is expertly matched, which supports visible installations where consistent appearance along edges is important across a full cabinet run or wall unit.
The 0.5mm veneer thickness lets trim and scrape tools work close to the panel surface, which helps achieve an edge that feels nearly flush after light sanding. The veneer is pre sanded to 180 grit, so the surface is ready for typical finishing steps once edges are trimmed, which can reduce labor per part. The veneer is undetectable finger jointed and laminated to a continuous fleece membrane, which allows long, continuous strips with visually minimized joint lines, supporting cleaner results on tall panels and long shelves. The hot melt adhesive coating on the back simplifies bonding by combining adhesive and banding in one material, supporting a single-pass heat application. The description notes that coating with hot melt adhesive plus sanding and backing allows easier finishing and handling, which ties together bonding, stability, and surface prep into one product for streamlined edgebanding workflows.
This Edgemate product uses real unfinished maple veneer, so the edge can be stained or clear coated to align with maple-faced panels in cabinetry or furniture projects.
The maple edgebanding is 0.5mm thick and 13/16 inch wide, providing coverage for common 3/4 inch substrates with a slim profile that trims closely to the panel face.
This specific Edgemate maple edgebanding roll is 250 feet long, which supports extended production runs and multiple cabinet or fixture projects from a single roll.
The maple edgebanding is coated with hot melt adhesive, so heat activation bonds the veneer to the substrate in one pass during edge application.
The veneer face is pre sanded to 180 grit, providing a smooth starting point for final light sanding and finishing to blend with other maple components.
The A quality veneer is undetectable finger jointed and laminated to a continuous fleece membrane, supporting long, continuous runs with visually minimized joint lines.
This Edgemate maple edgebanding pre glued, pre sanded, and unfinished is suited to projects that need maple edges to visually align with maple-faced panels. The 0.5mm thickness and 13/16 inch width support standard 3/4 inch substrates, while the 250 foot roll length aligns with ongoing cabinet or millwork production. The combination of A quality veneer, hot melt adhesive backing, and continuous fleece membrane provides a practical solution when consistent appearance and straightforward handling are priorities. For maple casework, shelving, or furniture components requiring real wood edges, this roll offers a focused, job-ready option.
Sold In: 250 Lineal Ft
