Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Round Wire Grommets 2-1/2 Bore describes a Hughes Supply plastic cover cap with a permanent wire hole cut out, so wires pass through the cap while the edge of the bore stays covered for a cleaner finished look. This dark brown cover cap is designed to be used with a 2-1/2 inch diameter hole, matching installations laid out for the PGH404 series, so it ties directly into a common hole size used in multimedia and workspace components. The cover cap is part of a grommet hole liner and grommet cover cap system sold separately, so the cap handles the visible top side while the liner addresses the bore, giving installers a defined division of roles for planning work. Hughes Supply identifies this part as H-0786-8265/BG10, so it can be referenced consistently when repeating successful layouts across multiple jobs.
This Hughes Supply cover cap is designed to be used with a 2-1/2 inch diameter hole, which lets installers base layouts on a straightforward round bore size that is already common on many benches and desks. The product is described for use with the PGH404 series, tying this cap to a known hole dimension and helping layouts stay consistent from one surface to the next. Because the cap is part of a system where grommet hole liner and grommet cover cap are sold separately, the cap can be specified wherever only the top finish element is required, keeping planning focused on the visible trim. The permanent wire hole cut out in the cap keeps the pass-through opening dedicated to wire routing, guiding cable paths through the same spot every time.
This Hughes Supply plastic cover cap belongs to the Round Wire Grommets category, placing it within multimedia and workspace components where round cutouts are part of the design. It is designed to be used with a 2-1/2 inch diameter hole, so it fits surfaces already drilled to that size in shelf, closet, or garage organization systems and in desks or benches. The reference to PGH404 series gives a clear target hole dimension, which supports standardized tooling across projects. As a dark brown cover cap, the part can be chosen where a darker tone helps the grommet blend into matching laminates or wood tones, which keeps attention on the work surface instead of the cutout. The manufacturer part number H-0786-8265/BG10 links the cap to Hughes Supply documentation, which helps buyers tie this specific fit and color to their internal material lists.
The permanent wire hole cut out in the cover cap defines exactly where cables exit the 2-1/2 inch bore, which supports repeatable wire routing patterns when the same layout is used across multiple stations. Because the cap is part of a grommet hole liner and grommet cover cap system that is sold separately, it can be selected independently of the liner, making it easier to repeat the same visible finish while adjusting liners to suit different panel constructions. The cap is described as a Round Wire Grommets component, which signals that the circular form and central cut-out are set up for typical cords rather than irregular shapes, leading to predictable clearances. Dark brown color identified in the SAP description allows a single visual standard to be applied wherever matching grommet openings are required, so multiple work areas can share the same look. Full box quantities of 10 and 100 give planners fixed count units, which helps align ordering with the number of identical bore locations on a project.
This Hughes Supply cover cap is designed to be used with a 2-1/2 inch diameter hole, so drilling to that size aligns the bore with the intended fit.
The permanent wire hole cut out keeps a fixed opening in the cap for cables, so routing paths stay consistent and the bore edge remains covered.
The cover cap is designed to be used with a 2-1/2 inch diameter hole noted with the PGH404 series, aligning it with that established bore dimension.
This part is the grommet cover cap in a system where the grommet hole liner and cover cap are sold separately, so it provides the finished top appearance.
The item is a dark brown plastic cover cap, which lets projects coordinate this finish with surrounding surfaces and other trim elements.
The cover cap carries manufacturer part number H-0786-8265/BG10 and SAP description COVERCAP, DARKBROWN 3', supporting consistent reordering.
This Hughes Supply Round Wire Grommets plastic cover cap with permanent wire hole cut out is designed around the 2-1/2 inch diameter hole used with the PGH404 series, so it aligns cleanly with that common bore size. The dark brown finish and defined wire opening let projects standardize both appearance and cable exit points across work surfaces, shelves, closets, and multimedia stations. When planning matching round pass-throughs, specifying the H-0786-8265/BG10 cover cap keeps the visible side of the installation consistent from one location to the next.
Sold In: 10 Each
