Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Round Wire Grommets 2-1/2 Bore Hole describes this Hughes Supply plastic cover cap that is designed for a 2-1/2 inch diameter hole, giving installers a defined solution for managing wire pass-through in desks, counters, or work surfaces. The cover cap has a permanent wire hole cut out, so the opening stays consistent every time wires are routed, which helps keep cable runs organized and predictable on repeat jobs. This part is identified as manufacturer part H-0786-BRS/C, allowing straightforward reordering when matching existing installations. The SAP description lists it as COVERCAP, BRASS 3', signaling a brass-look cap that suits projects calling for a brass appearance in multimedia and workspace components. As part of the Round Wire Grommets family in the grommets class, it fits typical cabinetmaking and workspace layouts where a clean, finished edge around a pre-bored hole matters.
This Hughes Supply cover cap is designed to be used with a 2-1/2 inch diameter hole, so boring operations can be set to that size knowing the cap will finish the edge. The web description states that the grommet hole liner and grommet cover cap are sold separately, which defines this part's role as the cap portion over a properly sized liner. Being part of the Round Wire Grommets family for the PGH404 series means it matches that series' 2-1/2 inch hole intent, helping maintain uniform fit across multiple locations on a job. As a plastic cover cap with a permanent wire hole cut out, it provides a fixed opening that installers can allow for when planning wire quantities and routing angles through the surface.
This Round Wire Grommets, 2-1/2 inch bore hole plastic cover cap with cut-out is positioned for multimedia and workspace components, so it suits worktops, desks, and similar surfaces that need finished wire pass-through points. The product falls under shelf, closet, and garage organization, which aligns it with storage or utility layouts where cables drop through panels into equipment spaces. Being intended for a 2-1/2 inch diameter hole lets it match bores commonly used in cabinetry and shop fixtures, minimizing layout changes when integrating it into an existing hole pattern. The association with the PGH404 series indicates that when used with the corresponding grommet hole liner, this cover cap forms the visible top finish around the opening on the work surface.
The cover cap has a permanent wire hole cut out, so the opening size and shape do not change between installations, which supports predictable cable fit and routing from one project to the next. As a plastic cover cap, it offers a stable, non-metallic edge around the wire cut-out, which helps maintain a consistent interface where cable jackets pass through the hole. The part designation H-0786-BRS/C and the SAP description COVERCAP, BRASS 3' allow shops to specify the same brass-style look whenever matching existing jobs, limiting visual variation in multi-phase work. Being defined as a grommet hole liner and grommet cover cap sold separately clarifies that this cap partners with a liner at the same 2-1/2 inch diameter, which helps preserve alignment between the liner wall and the cap opening when routing wires.
The H-0786-BRS/C cover cap is designed to be used with a 2-1/2 inch diameter hole, so boring operations can be set to that size for a matching finished opening.
The permanent wire hole cut out provides a fixed opening through the cap, keeping cable routing consistent and helping maintain a tidy wire pass-through point on the surface.
This cover cap is designed for use with a 2-1/2 inch diameter hole in the PGH404 series, forming the visible top finish when paired with a matching grommet hole liner.
The product is described as a plastic cover cap, giving a non-metallic component for finishing the 2-1/2 inch bore hole in multimedia or workspace applications.
The SAP description COVERCAP, BRASS 3' and the product name show it as a brass-style cap, which helps coordinate with brass-colored hardware on related projects.
This part serves as the grommet cover cap in a grommet hole liner and grommet cover cap combination, providing the finished top opening where wires pass through.
The Hughes Supply H-0786-BRS/C Round Wire Grommets 2-1/2 bore hole plastic cover cap with permanent wire cut-out offers a defined solution when a 2-1/2 inch diameter opening is already in the layout. For projects in multimedia and workspace components, or shelf, closet, and garage organization, its brass-style identity and fixed wire opening help keep finished surfaces consistent across multiple locations. When a job calls for a grommet hole liner and a matching cover cap, this part establishes the visible top finish and wire path around the 2-1/2 inch bore, supporting repeatable, clean wire management from one installation to the next.
Sold In: 100 Each
