Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Round Wire Grommets from Hughes Supply give a clean, finished look to 2-1/2 inch wire openings in desks, workstations, and cabinetry, which helps projects present as professionally built and organized. This plastic cover cap version is designed as part of a grommet system so openings stay controlled instead of looking like rough drilled holes. The cap has a permanent wire hole cut out, so conductors route in a fixed position rather than shifting and wearing against the edge. It is designed to be used with a 2-1/2 inch diameter hole, matching common PGH404 series liners for a consistent fit when lining and capping the same bore. The black color works well wherever a low-visibility, utility finish is preferred on work surfaces or enclosure panels.
This grommet cover cap is designed to be used with a 2-1/2 inch diameter hole, so boring operations can rely on a single, known size rather than trial fitting. When paired with a matching PGH404 series liner, the bore edge is lined and the cap seats over that liner, giving a layered interface that looks intentional instead of improvised. Because the wire hole in the cap is permanent, the route for cords and leads stays fixed relative to the bore, which helps repeat the same layout anytime you drill the same size opening and drop the same cap into place.
This Hughes Supply H-0786-T-9000/C round wire grommet cap fits projects that use a 2-1/2 inch diameter hole, so it pairs with PGH404 series bores in worktops, cabinets, or panels. The cap works with a separate grommet hole liner, so it suits jobs where the bore edge needs a liner for a smooth interior and the top needs a neat cap to match. Because the cap is plastic and finished in black, it is well suited to multimedia and workspace components where a dark, unobtrusive opening is preferred on counters, desks, or console faces. The round profile also aligns with standard hole saw tooling that installers already rely on for similar cutouts.
The permanent wire hole cut out in this cover cap locks in a defined cable path, which keeps wires from wandering across the opening and helps reduce visible clutter at the work surface. When the cap is used with a grommet hole liner from the same system, the 2-1/2 inch diameter hole is controlled from edge to surface, so cords contact smooth plastic rather than raw substrate, supporting a more finished feel. Matching the 2-1/2 inch design to PGH404 series liners also means an installer can standardize on one bore dimension and one cap part, which simplifies layout templates, ordering, and future expansions. The Hughes Supply H-0786-T-9000/C part number ties this cap directly to that setup, aiding repeat orders when expanding an existing run of workstations, closets, or multimedia stations that already use the same grommet configuration.
The grommet cover cap is designed to be used with a 2-1/2 inch diameter hole, so it matches that specific bore size in work surfaces or panels.
The cover cap has a permanent wire hole cut out, which keeps cables routed through a fixed opening and helps maintain a consistent, tidy exit point.
This product is from a grommet hole liner and grommet cover cap system, so it is intended to work with a separate liner on the same opening.
The cover cap is designed to be used with 2-1/2 inch diameter holes that align with PGH404 series openings, helping standardize bore sizes on projects.
The manufacturer part number is H-0786-T-9000/C, which identifies this specific Hughes Supply round wire grommet cover cap.
This round wire grommet cap covers the 2-1/2 inch bore and shapes the cable exit, helping wire pass-throughs look intentional on desks and cabinetry.
This Hughes Supply round wire grommet cover cap is designed as part of a grommet hole liner and cover system for 2-1/2 inch diameter holes, giving a coordinated approach to drilling, lining, and capping. The permanent wire hole cut out provides a defined, repeatable cable path, so multiple stations or cabinets can share the same neat layout. With the H-0786-T-9000/C part number, it is straightforward to specify the exact cap whenever matching PGH404 series openings on new builds or extensions. Choose this cap when the goal is a controlled, black plastic finish over a 2-1/2 inch bore in desks, closets, or multimedia work areas.
Sold In: 100 Each
