Round Wire Grommets 2-1/2 Bore Hole Cover

Round Wire Grommets 2-1/2 Bore Hole are identified here as the Hughes Supply H-0786-T-2250/C plastic cover cap, designed for finishing wire pass-through holes in work surfaces or cabinetry. This cover cap is made to work with a 2-1/2 inch diameter hole, so it addresses the common bore dimension used for routing power or data cables through desks, counters, and panels. The component is part of a round wire grommet system, so it serves as the visible cap rather than the hole liner, giving a clean almond-colored finish where the wiring exits. The manufacturer identifies it as a cover cap with a permanent wire hole cut out, so the opening is always present for cable routing, which removes an extra step on site and supports repeatable installations where the same hole size and cable route are required.

Key Cover Cap Details That Support Wire Runs

• The cover cap is specified for a 2-1/2 inch diameter hole, so it matches the stated bore size and helps standardize drilling operations on panels or tops using a single common hole saw size for repeat projects.
• The product is a grommet hole cover cap within a round wire grommet system, so it finishes the cable exit point while coordinating with the separate liner component to manage the transition from raw wood or laminate to a neat opening.
• The cover cap is identified as almond in the SAP description, so its color helps it blend with similarly toned surfaces, useful where a neutral finish around the cable opening is preferred rather than exposed substrate or dark fittings.
• The manufacturer notes that the grommet hole liner and this grommet cover cap are sold separately, so the cap can be selected or replaced independently of the liner to match color or style changes without disturbing the liner.
• The item is offered in full box quantities of 10 and 100, so it suits shop or field teams setting up multiple identical workstations or cabinets where repeating the same 2-1/2 inch wire pass-through detail is part of the layout.

Cover Cap Fit For 2-1/2 Inch Grommet Holes

This Hughes Supply plastic cover cap is designed specifically to be used with a 2-1/2 inch diameter hole, so any boring operation for this part can target that single dimension. The web description references PGH404 series in connection with that 2-1/2 inch hole, indicating the cover cap is intended to coordinate with that liner series in a two-part grommet assembly. Because it is part of a round wire grommet setup, the cap sits at the face of the work surface, establishing the finished edge of the opening where cables exit. Using a matched cap for the stated bore size helps the opening look intentional rather than improvised, especially when multiple holes are laid out across a run of cabinets or desks.

Using This Hughes Supply Grommet Cover Cap

Where This Round Wire Grommet Cover Cap Fits

The H-0786-T-2250/C part is defined as a grommet hole liner and grommet cover cap arrangement, with this component serving as the cover cap in that pairing. It is described as being designed to be used with a 2-1/2 inch diameter hole, so its fit is centered on that bore size rather than a range of openings. The product sits within the grommets category under multimedia and workspace components, which places it in applications such as desks, counters, or cabinetry where wires pass through a horizontal or vertical panel. The almond designation from the SAP description points to an almond tone finish, which is relevant when matching to surrounding surfaces or other almond-colored fittings in an office or cabinetry layout.

Why The Permanent Wire Cut-Out Matters In Use

The cover cap is described as having a permanent wire hole cut out, so the opening for cables is fixed and always present rather than adjustable or removable. This characteristic means the installer does not handle separate knock-outs or rotating pieces when routing wires, which can streamline repetitive workstation setups. The permanent cut-out also helps keep the cable path consistent across multiple units because each installed cap presents the same opening shape every time. The product is identified as a plastic cover cap, so it uses plastic construction at the visible surface, which suits typical multimedia and workspace environments where metal edges are not needed at the cable exit. Since the liner and cap are sold separately, the cap can be swapped as needed for color or style while the compatible liner in the 2-1/2 inch diameter hole remains in place.

Common Questions About This Wire Grommet Cover

Select This 2-1/2 Inch Almond Cover Cap

The Hughes Supply H-0786-T-2250/C plastic cover cap is tailored to a 2-1/2 inch diameter hole, so it fits projects already using that bore size for wire routing. Its role in a grommet hole liner and grommet cover cap setup lets it partner with a liner while presenting an almond-colored finish at the surface. The permanent wire hole cut out means every cap is cable-ready, which helps standardize workstation or cabinet penetrations across a job. For runs of desks, counters, or storage where multiple wire pass-throughs share the same layout, using this full box quantity cover cap helps keep openings consistent and visually aligned.