Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
5 mm brass shelf supports from the Pro Value Series are steel L-shaped shelf supports that hold adjustable or fixed shelving on a pin and rest combination. The 5/8 inch long and 1/2 inch wide shelf rest area creates a clear bearing surface for the shelf, which helps distribute weight along the bracket instead of concentrating it on a narrow point. The 1/16 inch thick L section gives a low-profile support that still maintains a defined edge under the shelf, which is useful where clearance above or below the shelf is tight. The hole in the support allows a screw to pass through into the shelf, which locks the shelf to the support and reduces movement in cabinets or closets that see vibration or repeated loading.
The shelf support uses a pin with a 3/16 inch bore pin length of 5/16 inch and a 1/4 inch bore pin length of 3/8 inch, which relates the pin extension to common hole sizes in cabinet sides. The 5 mm brass shelf supports configuration centers on a defined pin and rest geometry, which helps the support sit squarely in properly sized bores and carry load through both the pin and the horizontal leg. The L-shaped design positions the shelf rest directly above the pin centerline, which helps keep the load path close to the panel face and reduces leverage on the bore.
Pro Value Series shelf supports in a 5 mm brass configuration fit naturally into cabinet, closet, and storage work that uses drilled shelf pin holes. The 5/8 inch long and 1/2 inch wide shelf rest area suits typical panel depths, so these steel L-shaped shelf supports can be spaced along cabinet sides to carry common shelving widths. In closet organizers and utility cabinets, the brass finish visually coordinates with other brass-toned hardware, which helps the interior look unified when the doors are open. The compact 1/16 inch thick L keeps the support discreet beneath the shelf, which is useful for open shelving where the underside is visible from seated or standing positions.
The defined 5/8 inch by 1/2 inch shelf rest area gives each support a repeatable reference surface, which helps installers set multiple shelves at the same height without relying on eye alone when aligning to drilled rows. The 3/16 inch bore pin length of 5/16 inch and 1/4 inch bore pin length of 3/8 inch relate directly to how deep the pin sits in the bore, which helps balance insertion depth with available material in the cabinet side. The integrated hole in the support accepts a screw for affixing to the shelf, which locks the shelf to the support and reduces the chance of shelves lifting off when moved or bumped from below. Because the steel L-shaped construction maintains a fixed right angle between pin and rest, these 5 mm brass shelf supports help keep shelves seated squarely in normal cabinet conditions, which supports consistent reveals and door clearances once the installation is complete.
The IF1345BP is a Pro Value Series steel L-shaped shelf support with a brass finish, which provides a right angle pin-and-rest design for supporting shelving in drilled panels.
The Pro Value Series shelf support has a shelf rest area 5/8 inch long and 1/2 inch wide, which offers a stable bearing surface to seat typical cabinet or closet shelves.
The L-shaped section is 1/16 inch thick, which keeps the support visually light under the shelf while still defining a firm edge for the shelf to rest against.
The support has a hole to accommodate a screw into the shelf, which ties the shelf to the support and helps resist lifting or shifting during everyday use.
The shelf support uses a 3/16 inch bore pin length of 5/16 inch and a 1/4 inch bore pin length of 3/8 inch, which aligns pin depth with common drilled hole diameters.
This IF1345BP support has a brass finish on the steel L-shaped body, which matches brass-toned cabinet hardware and gives shelving a coordinated interior appearance.
The Pro Value Series IF1345BP 5 mm brass shelf supports combine a 5/8 inch by 1/2 inch L-shaped shelf rest with defined pin lengths for 3/16 inch and 1/4 inch bores, which helps you set shelves on a consistent, square bearing surface. The 1/16 inch thick steel L keeps the hardware compact while the screw hole offers an option to secure the shelf to the support, which is useful where movement or lifting would affect alignment. For cabinets, closets, and storage runs built around drilled shelf pin rows, these steel L-shaped shelf supports provide a straightforward way to carry adjustable shelves with a coordinated brass finish.
Sold In: 100 Each
