
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
L shaped steel shelf supports from the Pro Value Series provide a compact way to support shelves using 3/16 inch and 1/4 inch bores, giving flexibility when drilling cabinet or closet side panels. The L shaped design uses a steel body, so the support resists bending under typical cabinet loads and maintains consistent bearing at the shelf edge. A 5/8 inch long shelf rest area gives a defined contact surface under the shelf, which helps spread weight and reduces point loading on the panel holes. The 1/2 inch wide rest gives lateral stability to the shelf edge, which is useful in narrow cabinets where side movement can cause racking. The L thickness of 1/16 inch keeps the support low profile, so the front edge of the shelf sits close to the panel while still resting fully on steel. The nickel finish provides a clean, neutral appearance that blends with common cabinet interiors.
The support is designed for 3/16 inch and 1/4 inch bores, so it ties directly into common cabinet system drilling patterns on side panels. The dedicated pin lengths - 5/16 inch for 3/16 inch bores and 3/8 inch for 1/4 inch bores - give predictable engagement depth, which helps when matching hole depth to panel thickness in production. The hole in the L for a screw provides a mechanical way to affix the shelf, which is helpful where vertical movement or accidental lift-out would be a concern. The nickel finish offers a neutral, metallic look in the cabinet interior, so the support stays visually quiet under the shelf while still presenting a finished appearance along the row of pins.
The L shaped steel shelf supports fit into 3/16 inch and 1/4 inch bores, so they work in cabinet, closet, and storage layouts that rely on those drilled pin systems. The 5/8 inch long and 1/2 inch wide shelf rest area gives a defined footprint under typical panel or solid shelves, which suits adjustable shelving in kitchen cabinets or closet towers. The 1/16 inch L thickness keeps the shelf close to the cabinet side, which is useful when aligning shelves with doors or face frames in built-ins. The nickel finish provides a neutral, metallic tone that coordinates with many hinge and drawer slide finishes, so hardware in the same opening presents a consistent look. The hole provided in the support for a screw lets the installer affix the shelf to the support, which is valuable in taller units or mobile pieces where shelf movement would be undesirable. By using one part number, IF1346NP, across these drilled applications, a shop can streamline ordering and inventory for adjustable shelving points.
The defined 5/8 inch length of the shelf rest allows installers to reference a known support depth when laying out shelf overhangs, which improves consistency from opening to opening. The 1/2 inch width across the rest helps keep the shelf square to the side panels, which is important when several supports share the load in a wide cabinet. The 1/16 inch thickness of the L determines the gap between the shelf edge and side panel, which can be planned into reveals around doors and face frames. The specific pin lengths for the 3/16 inch and 1/4 inch bores give a predictable amount of steel engaged in the panel, which aids in choosing drill depth during production runs. The screw hole in the support offers a fixed location for tying the shelf down, which supports repeatable positioning across multiple units. The Pro Value Series designation links this support to a broader hardware family, which can simplify reordering and long-term service when cabinets or closets are expanded later.
The L shaped steel shelf supports are designed for 3/16 inch and 1/4 inch bores, so they drop into commonly drilled cabinet and closet side panels using those pin diameters.
The support has a 5/8 inch long and 1/2 inch wide shelf rest area, which provides a defined steel bearing surface under the shelf edge for better load distribution.
The L thickness is 1/16 inch, so the support stays low profile while still placing steel directly under the shelf, helping maintain a tight reveal to the cabinet side.
The support has a hole to accommodate a screw for affixing to the shelf, which provides a mechanical connection to resist lift or shifting in taller units.
The 3/16 inch bore pin length is 5/16 inch and the 1/4 inch bore pin length is 3/8 inch, giving predictable engagement depth in each drilling pattern.
The IF1346NP supports are nickel finish steel from the Pro Value Series, providing a neutral appearance tied to a consistent product family.
The Pro Value Series L shaped steel shelf supports IF1346NP bring together defined rest dimensions, 3/16 inch and 1/4 inch bore fit, and a nickel finish that suits cabinet interiors. The screw-ready hole, matched pin lengths, and low profile L thickness help translate standard drilled panels into solid, adjustable shelving. For cabinet, closet, or storage runs built around these bore sizes, this part number gives a straightforward way to support shelves using a repeatable, steel-based solution.
Sold In: 100 Each