
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
L shaped steel shelf supports from the Pro Value Series provide a defined 5/8 inch long shelf rest area that helps support the front edge of a shelf in a cabinet or closet run. The 1/2 inch wide rest spreads the load across more surface area, which helps the shelf sit flat against the support. The L thickness of 1/16 inch keeps the support low profile while still giving a clear bearing surface under the shelf edge. A hole in the support allows a screw to affix the support directly to the shelf, which locks the shelf to the pin location and helps prevent shifting during use. The IF1346BP design is offered in brass, nickel, and brown finishes, which lets the installer align visible hardware with the surrounding interior color scheme.
The 3/16 inch bore version of this shelf support uses a 5/16 inch long pin, which sets the engagement depth when it is fitted into a 3/16 inch bore in the cabinet side or panel. The 1/4 inch bore version uses a 3/8 inch long pin, which provides additional insertion length in a 1/4 inch bore and helps the support track square to the side panel. The L shaped rest then extends 5/8 inch from the pin location, giving the shelf a predictable overhang distance from the bore centerline. The 1/2 inch width of the rest allows the shelf to sit with a defined front-to-back contact area, which supports repeat placement along adjustable rows of holes.
The IF1346BP L shaped steel shelf supports sit in 3/16 inch or 1/4 inch bores, depending on the selected version, which positions them well in cabinet and closet side panels that are drilled for adjustable shelves. The 5/16 inch pin length on the 3/16 inch bore option and 3/8 inch pin length on the 1/4 inch bore option engage the side material while leaving the L rest exposed to carry the shelf. The 5/8 inch long and 1/2 inch wide rest area supports the underside near the front or mid-depth of the shelf, which works for typical cabinet depths where a compact support is preferred at the sidewall. The availability of brass, nickel, and brown finishes allows these Pro Value Series shelf supports to blend visually with common hinge and pull finishes or with light and dark interior panel colors.
The defined 5/8 inch shelf rest length gives a consistent projection from each bore centerline, which supports repetitive drilling patterns for multiple shelves in a run. The 1/2 inch width of the rest provides a stable seating area that helps shelves align evenly when four supports are used at the corners of a panel set. The 1/16 inch L thickness sets a predictable vertical offset between the underside of the shelf and the bore center, which helps layouts that rely on fixed vertical spacing between shelf faces. The screw hole through the support allows the shelf to be affixed directly to the L, which keeps the shelf locked to the pin locations when units are moved or when loads shift on the shelf surface. Because the pins are sized with 5/16 inch length for 3/16 inch bores and 3/8 inch length for 1/4 inch bores, the supports can seat to a repeat depth in their respective holes, which helps align shelf heights across multiple cabinets drilled to the same pattern.
The 5/8 inch long shelf rest area carries the underside of the shelf near its edge, which helps spread the load and keeps the shelf sitting flat on the support.
The 3/16 inch bore version uses a 5/16 inch pin, while the 1/4 inch bore version uses a 3/8 inch pin, which sets how deeply the support seats in each bore size.
The hole for a screw allows the shelf to be affixed directly to the support, which helps prevent the shelf from lifting or shifting during normal loading and movement.
The 1/16 inch L thickness keeps the support compact against the cabinet side, which provides a low-profile bearing surface while maintaining consistent shelf height.
The brass, nickel, and brown finish options let the installer align the visible support with interior colors or adjacent hardware finishes in cabinets and closets.
The 1/2 inch wide shelf rest puts more surface under the shelf edge, which helps stabilize the shelf and supports the load across a wider contact area.
Pro Value Series L shaped steel shelf supports in the IF1346BP family provide defined 3/16 inch and 1/4 inch bore options, which lets you match the pin to your drilling pattern. The 5/8 inch long, 1/2 inch wide, 1/16 inch thick L rest gives each shelf a consistent bearing surface, and the screw hole allows direct attachment when a locked shelf position is preferred. With brass, nickel, and brown finishes available, select the bore size and finish that align with your cabinet layout and interior color so each shelf sits where it is planned and stays there in regular use.
Sold In: 100 Each