Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
L shaped steel shelf supports give cabinet and closet shelves a defined 5/8 inch long by 1/2 inch wide resting surface, so the shelf bears on a flat, predictable area instead of a point contact. The 1/16 inch thick L profile creates a low-profile support ledge, which helps the shelf sit close to the cabinet side while still being carried by steel. The nickel finish on these Pro Value Series supports provides a neutral metallic look, which works well in many cabinet interiors where a bright, unobtrusive support is preferred. This BA1610BN support is built as a pin-style rest for 1/4 inch and 3/16 inch bores, so it drops into standard drilled holes on cabinet sides and vertical panels in a repeatable way. By matching the pin to the bore, the support locates consistently and keeps shelf loads bearing on the L rest.
This Pro Value Series BA1610BN shelf support is designed around 3/16 inch and 1/4 inch bores, so it fits straight into common drilled holes used in cabinet and shelving systems. The 3/16 inch bore version uses a 5/16 inch long pin, giving enough depth to seat in thinner side panels while remaining easy to insert and remove during layout changes. The 1/4 inch bore version uses a 3/8 inch long pin, adding a bit more engagement in the larger hole diameter so the support resists rocking under shelf load. Because the shelf rest area is fixed at 5/8 inch by 1/2 inch, installers can lay out shelf depths knowing exactly how much ledge is available under the shelf edge.
As a Pro Value Series shelf support in the shelf, closet and garage organization category, the BA1610BN part is intended for use wherever drilled side panels carry adjustable shelves. In cabinet interiors, the 1/4 inch or 3/16 inch bore pins let these supports seat into rows of system holes along stiles and end panels, so shelves can be repositioned while staying on a positive L shaped seat. In closet or garage organization runs, the same bore and pin setup works in vertical panels that carry long shelves, letting installers repeat the same hardware across multiple bays. The 5/8 inch long by 1/2 inch wide rest area gives those shelves a defined contact patch, helping them align flush with neighboring units when several sections are ganged together.
The consistent 1/16 inch thick L profile of these BA1610BN shelf supports keeps the shelf edge height relative to the bore center predictable from cabinet to cabinet, which simplifies drilling patterns and shelf sizing. When the screw hole in the support is used to affix the shelf, the connection between shelf and support becomes fixed, so shelf edges stay aligned when units are shifted or handled in the field. The different pin lengths for 3/16 inch and 1/4 inch bores mean each version seats appropriately for its hole size, which helps reduce wobble that could throw off reveals between doors, drawers, and the shelf line. With the nickel finish option, these supports present a clean interior look that blends into many cabinet colors, so attention stays on the shelf fronts and faces while the supports perform quietly in the background.
The BA1610BN shelf supports are designed for 3/16 inch and 1/4 inch bores, so they fit commonly drilled side panel holes in cabinet and shelving projects.
The L shaped support provides a 5/8 inch long by 1/2 inch wide rest area, giving shelves a defined steel ledge to bear on along the cabinet side.
The BA1610BN L section is 1/16 inch thick, so the support stays low profile while still creating a solid shelf ledge against the cabinet panel.
The support has a hole to accommodate a screw into the shelf, which lets the shelf be affixed to the support to resist movement under load.
For 3/16 inch bores, the pin length is 5/16 inch, and for 1/4 inch bores, the pin length is 3/8 inch, giving appropriate engagement in each hole size.
These L shaped shelf supports are available in brass, nickel, and brown finishes, allowing the visible hardware to coordinate with different cabinet interiors.
The BA1610BN L shaped steel shelf supports from the Pro Value Series combine defined 5/8 inch by 1/2 inch rest areas with pins sized for 3/16 inch and 1/4 inch bores, so they integrate smoothly into drilled cabinet systems. With 1/16 inch thick L legs and a nickel finish, they provide a compact, consistent ledge that works across cabinet, closet, and garage organization projects. For runs where shelf alignment, straightforward drilling, and a clean interior appearance matter, this part number offers a practical hardware choice for repeatable results.
Sold In: 1000 Each
