Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockford Process five knuckle hinge is a free swinging overlay hinge built for institutional and hospital applications where consistent door motion is critical. The 270 degree screw-on design lets the door swing through a wide arc so it can clear the opening in demanding layouts. As a semi-concealed hinge, it leaves key hardware visible for inspection while keeping the overall cabinet face clean in finished installations. The gloss black finish provides a dark, uniform look that blends with black casework or creates contrast on light-colored frames. A frame leaf length of 1-3/4 inch gives a defined bearing surface on the frame, supporting the door load along a known dimension. Barrel height of 2-3/4 inch spreads the knuckles across a taller section, which distributes movement over more contact area during repeated cycles.
This semi-concealed overlay hinge uses a screw-on mounting method, so each leaf fastens directly to the door and frame through prepared holes. Because it is designed for the 32 mm hole system, it aligns with rows of 32 mm-spaced bores commonly used in casework manufacturing, helping the hinge register to existing drilling patterns. The elongated holes on both leaves offer lateral and vertical play during installation, allowing the hinge to be shifted slightly before final tightening so the door gap can be tuned. With a frame leaf length of 1-3/4 inch and a barrel height of 2-3/4 inch, the mounting geometry creates a defined pivot location that supports repeatable placement across multiple doors on the same run.
This hinge is classified as an institutional hinge and described as hospital grade, so it is suited to projects where doors experience frequent operation and hardware needs to remain consistent. The semi-concealed design keeps part of the hinge visible at the frame edge, which supports visual confirmation of hinge condition while keeping the majority of the hardware recessed. Its free swinging, 270 degree overlay movement allows doors to open widely relative to the frame, which is valuable when cabinets must provide broad access to interior contents in tight service spaces. The gloss black finish on this P374-1D version gives a dark hinge line that can coordinate with black-faced cabinets or be used intentionally as a contrast detail on lighter frames. Since the same hinge is available in Dull Chrome, White, Barrel Brass and Stainless Steel, projects with mixed room finishes can stay within one hinge family while changing surface appearance.
The hinge is designed for the 32 mm hole system, so its layout ties into standard line-boring patterns that are common in cabinet shops, supporting efficient drilling and predictable hardware placement. With a material thickness of 0.095 inch (2.4 mm), each leaf offers a solid bearing surface around the screw locations, which helps the hinge hold its position under regular door cycling. The tight screw pin and five knuckle construction provide a controlled pivot joint, which helps the door track the same arc every time and reduces play at the edge. A frame leaf length of 1-3/4 inch defines the contact area on the frame stile, helping distribute forces along that measured length during opening and closing. Barrel height of 2-3/4 inch spaces the knuckles vertically, which spreads wear over more engagement area during movement. Elongated holes on both leaves create adjustment range at install, allowing final shifts to align reveals and margins along a run of doors. Identifying the hinge by manufacturer part number P374-1D links it directly to Rockford Process Control, Inc., which simplifies reordering the same hinge for future additions or service work.
The Rockford Process P374-1D is a semi-concealed, free swinging overlay five knuckle hinge designed as an institutional, hospital grade component for doors requiring consistent, repeatable motion.
The hinge offers 270 degree free swinging motion, allowing the door to swing through a wide arc so the opening can be accessed broadly in demanding cabinet or casework layouts.
The hinge is designed for the 32 mm hole system, so it aligns with common line-bored cabinet patterns, supporting efficient drilling and consistent hinge positioning across multiple doors.
The elongated holes on both leaves allow small adjustments during fastening, so the hinge position can be shifted slightly to tune door reveals and margins before final tightening.
The 0.095 inch (2.4 mm) material thickness gives each hinge leaf a substantial section, helping it support typical door loads and resist deformation under regular institutional use.
The hinge is available in Gloss Black, Dull Chrome, White, Barrel Brass and Stainless Steel, allowing the hardware finish to align with various cabinet and room designs.
The hospital grade, semi-concealed design of the Rockford Process P374-1D hinge pairs 270 degree free swinging overlay motion with a screw-on format tied to the 32 mm hole system. The 1-3/4 inch frame leaf length, 2.75 inch barrel height, and 0.095 inch material thickness provide defined geometry and structure for institutional and cabinet work. With gloss black and additional finish options available within the same hinge family, projects can standardize on this five knuckle layout. Use the verified Rockford Process P374-1D identification when specifying hinges so future runs and service work reference the same hardware.
Sold In: 1 Pair
