Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockford Process free swinging overlay hinge gives cabinets a 270 degree door swing, letting doors open back against the panel so medical and institutional casework can clear openings and equipment without binding at the hinge side. As a semi-concealed, five knuckle design in the Institutional Hinges category, it keeps the barrel exposed for strength while tucking the leaves against frame and door for a cleaner, more controlled appearance in high-use areas. The dull chrome finish provides a neutral, professional look that blends with typical clinical hardware palettes and metal casework. Hospital grade tips are designed for institutional environments where smooth, finished ends matter for safety and cleanability. Being a screw-on hinge lets installers drive fasteners directly through the leaves, which supports straightforward mounting with typical cabinet construction methods. The hinge is identified as Manufacturer Part P376-26D, which helps match it to drawings, replacement schedules, and facilities standards.
This Rockford Process free swinging overlay hinge is designed for the 32 mm hole system, so it fits cabinet programs that drill on that standardized pattern used in many institutional and commercial casework lines. As a screw-on hinge, it relies on screws driven through the leaves, which lets installers position the hardware directly on wood or composite frames and doors prepared for overlay applications. The frame leaf length is 1-3/4 inch, providing a defined bearing surface on the frame side so the hinge anchors solidly along the stile edge. Elongated holes on both leaves support fine tuning during installation, since the leaves can slide slightly before final tightening to correct for drilling tolerances or small layout variations on site.
This hinge is categorized as an Institutional Hinge and is hospital grade, so it aligns with cabinets and casework in medical, clinical, and similar facilities where robust swing and controlled hardware presentation are required. The semi-concealed construction keeps the hinge barrel visible while the leaves sit against frame and door edges, giving maintenance staff a clear view of the working joint while preserving a more finished cabinet face. With a barrel height of 2-3/4 inch, the hinge presents a substantial pivot section that supports the door across a taller bearing surface, helpful on heavier institutional doors. The material thickness of .095 inch, noted as 2.4 mm, gives each leaf a solid cross-section so the hinge can serve in demanding, high-use installations where lighter cabinet hinges would not be appropriate.
The free swinging overlay configuration provides a 270 degree opening arc, which lets doors clear adjacent surfaces and fold back along cabinet sides without forcing the hinge into binding angles, supporting smoother operation in tight rooms. Elongated holes on both leaves provide in-plane adjustability during installation, letting installers nudge the hinge location to line up reveals and margins between door and frame before driving final torque on the screws. The tight screw pin helps the barrel rotate without excessive end play, which supports consistent door gaps and keeps doors from drifting under their own weight over time. Available finishes listed as Gloss Black, Dull Chrome, White, Barrel Brass, and Stainless Steel allow this same hinge pattern to coordinate with different design schemes or replacement conditions where finish matching matters. In dull chrome, the P376-26D hinge maintains a subdued metallic look that fits many institutional and commercial interiors while still matching other Rockford Process Control hinge components specified on the project.
The Rockford Process free swinging overlay hinge is designed for the 32 mm hole system, which suits cabinet and casework programs laid out on that common drilling standard.
The hinge provides a 270 degree door swing, allowing doors to open back against cabinet sides and giving wide access in institutional and commercial settings.
The five knuckle construction spreads movement across more joints, supporting smoother door articulation and distributing load along the barrel during repeated openings.
Elongated holes on both leaves let installers shift the hinge slightly before tightening screws, helping align doors with frames and refine cabinet reveals.
The frame leaf length is 1-3/4 inch, providing a defined mounting surface on the frame that supports solid attachment along the stile edge.
The P376-26D hinge has a material thickness of .095 inch, or 2.4 mm, giving each leaf a substantial section for institutional cabinet duty.
The Rockford Process free swinging overlay hinge P376-26D combines a 270 degree opening arc, five knuckle barrel, and hospital grade tips in a dull chrome semi-concealed format suited to institutional cabinet runs. With a 32 mm hole system layout, 1-3/4 inch frame leaf length, 2.4 mm material thickness, and elongated holes on both leaves, it supports accurate screw-on mounting and dependable door alignment on medical and commercial casework.
Sold In: 1 Pair
