Rockford Process Free Swinging Overlay Five Knuckle Hinge, 270º Screw-on Dull Chrome - P374-26D
Description
Rockford Process Overlay Hinge For Institutional Doors
Rockford Process overlay hinge is a semi-concealed, free swinging five knuckle hinge built for institutional and similar heavy-use cabinet and frame applications. The design uses a 270 degree screw-on configuration, so the door can swing through a wide arc while staying supported at the frame. The hinge is part of the Rockford Process Control, Inc. hospital grade line, giving installers a hardware option aimed at demanding environments such as medical or care facilities where doors are operated frequently. A dull chrome finish presents a neutral, worklike appearance that suits metal or painted casework. The hinge is categorized as an institutional hinge, which positions it for projects where durability and repeatable alignment are important. As an overlay hinge in the semi-concealed class, it lets the door overlay the frame while keeping much of the hardware out of direct sight, which helps projects that need a cleaner installed look without complex hardware layouts.
Key Hinge Details That Support Tough Use
- The free swinging design lets the hinge move through its arc without built-in closing resistance, which helps when doors are opened and closed constantly in institutional spaces because the hardware is not fighting the motion.
- The five knuckle layout spreads the pivot points along the barrel, which stabilizes the movement of the door leaf and frame leaf under load and helps keep the hanging line more consistent over time.
- The hinge is described as hospital grade, so the tips are built for demanding settings where carts, beds, or equipment may contact the hinge area, which matters when choosing hardware for medical or care facilities.
- A tight screw pin is specified, which limits play in the barrel, so the door feels more controlled through its swing and helps reduce rattle at the hinge line during repeated operation.
- Elongated holes on both leaves are provided, giving installers some lateral adjustment during mounting, which helps fine-tune overlay and reveal without redrilling when the initial layout is slightly off.
- The hinge uses a dull chrome finish, offering a muted, functional surface that pairs well with common institutional color schemes and reduces visual glare along the frame edge.
Mounting Layout And Overlay Hinge Fit Details
This semi-concealed overlay hinge is designed around the 32 mm hole system, so it integrates into casework and cabinets that follow the 32 mm drilling pattern commonly used in institutional and commercial installations. A screw-on mounting style means the hinge is fastened directly through the leaves into the door and frame, which provides a straightforward workflow on site or in the shop using standard drilling tools laid out to the 32 mm system. Elongated holes in both the frame leaf and the door leaf allow the hinge position to shift slightly during installation, so the door-to-frame relationship can be adjusted for even gaps. As an overlay hinge, it is intended for doors that cover part of the frame face, letting the installer use the hinge geometry to control how much of the frame remains visible.
How This Five Knuckle Overlay Hinge Works In Use
Overlay Hinge Position On Frame And Door
This Rockford Process Control, Inc. institutional hinge mounts with one leaf on the frame and the other on the door, with the barrel forming the visible pivot line along the edge. The frame leaf length is 1-3/4 inches, which sets how far the mounting holes run along the frame, helping installers understand where the pivot will sit relative to the frame edge. With a barrel height of 2-3/4 inches, the hinge presents a tall pivot surface, which helps distribute the door load vertically along the joint. The hinge is described as a semi-concealed overlay hinge, so once mounted, much of each leaf sits behind the door and frame while the barrel and a portion of the leaves remain visible, guiding how the hardware will appear on finished casework. Designed for the 32 mm hole system, the hinge aligns naturally with rows of system holes in commercial cabinets, which simplifies setting consistent hinge positions across multiple doors in a run.
Why Construction And Finish Support Repeatable Results
The hinge uses a material thickness of 0.095 inches, or 2.4 mm, which gives the leaves a solid cross-section that resists bending during door operation and helps doors stay aligned under regular institutional use. A tight screw pin holds the five knuckle barrel together, which limits looseness at the pivot and supports a smooth swing over time, reducing the chance of door sag due to hinge play. Elongated holes on both leaves allow small shifts during screw-on installation, so installers can dial in overlay and reveal with the door hung, improving alignment without altering the cabinet layout. The dull chrome finish offers a practical surface that fits well with hospital grade applications where a low-profile appearance is preferred. The hinge belongs to a family that is available in five finishes - gloss black, dull chrome, white, barrel brass, and stainless steel - so projects can maintain the same geometry and hole pattern while varying finish to meet different room or casework aesthetics.
Common Questions About The P374-26D Overlay Hinge
What type of hinge is the P374-26D model?
The P374-26D model is a Rockford Process semi-concealed overlay five knuckle hinge, so it lets the door overlay the frame while keeping most of the hinge behind the door and frame surfaces.
How far does this hinge allow the door to swing?
The hinge is described as a 270 degree screw-on free swinging hinge, so the door can swing through a wide arc, useful for applications needing broad access to the cabinet or opening.
What mounting system does this overlay hinge match?
The hinge is designed for the 32 mm hole system, so it aligns with cabinets and casework drilled on that system pattern for consistent hinge positioning.
Why are elongated holes on both leaves important?
The elongated holes on both leaves provide adjustment during screw-on installation, letting the installer shift the hinge slightly to fine-tune overlay and door reveal.
What are the key frame and barrel dimensions?
The hinge has a frame leaf length of 1-3/4 inches and a barrel height of 2-3/4 inches, which define the mounting footprint and pivot height along the frame edge.
How does the material thickness affect performance?
The 0.095 inch, or 2.4 mm, material thickness gives the hinge leaves a substantial section, which supports door weight and helps resist deformation under regular institutional use.
Select This Institutional Overlay Hinge For Your Next Run
The Rockford Process overlay hinge P374-26D combines a semi-concealed overlay design, 270 degree free swinging motion, and 32 mm hole system compatibility, so it fits well into institutional and commercial casework projects. Hospital grade tips, a tight screw pin, and five knuckle construction give this hinge a role where doors see frequent operation. With frame leaf and barrel dimensions clearly defined, it is straightforward to plan hinge locations on frames and doors across a project. For woodworking professionals and serious builders sourcing institutional hinges, this dull chrome model offers a consistent geometry within a finish family that spans multiple color and metal options, supporting coordinated hardware layouts while maintaining the same mounting pattern.
