Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockford free swinging overlay hinge is a semi-concealed, five knuckle hinge designed for overlay doors, so it lets the door pivot smoothly while leaving a clean, professional face on institutional and cabinet installations. The hinge is designed for the 32 mm hole system, which ties directly into line-bored casework layouts and speeds layout on commercial cabinetry and casework. Its free swinging operation allows the door to move without built-in closing force, giving you predictable motion that pairs well with external catches or other control hardware where needed. As an institutional hinge in the Rockford Process Control, Inc. line, it is intended for demanding environments where repeatable hardware performance supports everyday door use. In this P376-E51 version the hinge is finished in white, so it blends with light-colored doors and frames for a consistent appearance across cabinets and frames.
This Rockford Process free swinging overlay hinge uses a screw-on mounting style, so it fastens directly through the leaves into the door and frame to secure the overlay installation. The design for the 32 mm hole system ties into standard line-bored cabinet layouts, which supports efficient hinge positioning when working with system-drilled casework. A frame leaf length of 1-3/4 inch gives a defined bearing surface on the frame side, helping the hinge sit solidly against the frame material during mounting. The semi-concealed hinge class means part of the hardware is recessed while part remains visible, balancing clean appearance with straightforward screw access when you are installing or adjusting the hinge on site.
This hinge is categorized as an institutional hinge, so it is suited to casework and doors in environments that call for hospital grade tips and consistent daily operation. The white finish on this P376-E51 model coordinates with light-colored doors and frames, helping the hardware sit visually quiet on painted or laminate casework. As a semi-concealed hinge, it positions much of the mechanism within the door and frame while leaving the knuckle area visible, which balances an institutional look with access to the hinge barrel. The five knuckle construction produces a taller barrel height of 2-3/4 inch, giving a substantial visual presence along the door edge that matches the expectations for institutional hardware installations.
The hinge is designed around the 32 mm hole system, which supports accurate, repeatable placement on system-drilled cabinets so hinge locations line up across multiple openings. Elongated holes on both leaves provide adjustment room during mounting, allowing the door position to be shifted slightly to refine overlay and gap consistency. The tight screw pin holds the knuckles together, helping the barrel maintain its shape under repeated cycles so the door keeps swinging smoothly over time. A material thickness of .095 inch, or 2.4 mm, in the hinge leaves provides a solid bearing surface at each screw location, which supports the hinge as it carries door weight through the overlay swing. The barrel height of 2-3/4 inch contributes to distributing the load along the hinge edge, which is useful on institutional doors that see frequent opening and closing.
The Rockford Process free swinging overlay hinge is designed for overlay doors, so the door overlays the frame while the hinge controls the swing on institutional and cabinet casework.
The hinge is rated as a 270 degree screw-on hinge, allowing a very wide opening arc so doors can swing back against the cabinet or frame where the layout allows.
The hinge is designed for the 32 mm hole system, so it lines up with standard line-bored cabinet patterns and supports consistent hinge placement from cabinet to cabinet.
The Rockford hinge has a frame leaf length of 1-3/4 inch, providing a defined mounting surface on the frame side for solid attachment to the casework.
The elongated holes on both leaves allow slight movement during installation, so the door position and overlay can be adjusted before the screws are tightened.
The hinge has a material thickness of .095 inch, or 2.4 mm, giving each leaf a solid cross-section to support door loads in institutional and cabinet use.
The Rockford Process free swinging overlay hinge in white pairs a 270 degree screw-on design with five knuckle, semi-concealed construction, so it supports wide-opening overlay doors on institutional and cabinet casework. With its 32 mm hole system layout, 1-3/4 inch frame leaf length, and elongated holes on both leaves, it offers practical adjustment room and predictable positioning when you are hanging multiple doors. For projects calling for a hospital grade tipped hinge in a white finish, this institutional overlay hinge delivers the specific dimensions and features needed for consistent casework installations.
Sold In: 50 Pair
