Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockford Process free swinging overlay hinge gives you a five knuckle, semi-concealed hinge in dull chrome for institutional cabinet and door projects. The hinge is classified as an institutional hinge, so it suits demanding environments where repeat use is normal. A 270 degree opening design allows doors to swing well past 180 degrees, which helps when full access to the cabinet interior is needed during work, cleaning, or maintenance. The frame leaf length of 1-3/4 inch sets a predictable bearing surface on the frame, which helps you plan clearances and screw placement. Barrel height of 2-3/4 inch defines the vertical bearing span, which spreads load across a taller knuckle stack. Material thickness of 0.095 inch, or 2.4 mm, provides a substantial leaf cross-section that supports frequent cycling in institutional applications.
This hinge is designed for use with a 32 mm hole system, which aligns with cabinet layouts that follow the industry-standard 32 mm drilling pattern for hardware. That design intent lets you position the hinge using existing line boring or system drilling equipment. The screw-on configuration means the hinge fastens to the frame and door with screws through the leaves, giving a straightforward mechanical attachment method that fits common woodworking practices. As a semi-concealed overlay hinge, it supports an overlay door layout where the door overlays the frame, letting you plan reveals and door sizing around that overlay style.
The P375-26D hinge is categorized as an institutional hinge, which aligns it with institutional and similar commercial millwork where durability and consistent performance are central needs. Hospital grade tips are part of the design, signaling a tip form suited to hospital environments where snag reduction and clean lines matter. That combination of institutional classification and hospital grade tips makes this hinge a match for health care cabinets, resident room casework, and similar installations that carry hospital design expectations. The hinge belongs to the semi-concealed hinge product class, so it supports casework where the hardware should stay visually restrained while still being serviceable. Use with the 32 mm hole system connects the hinge to system-based cabinetry, allowing it to drop into line-bored cabinet sides or frames laid out on 32 mm centers.
The 270 degree opening capability lets doors swing back against adjacent panels or walls when layouts allow, which clears the opening for staff when loading equipment, linens, or supplies. That extended travel reduces interference during workflows that demand frequent cabinet access. Five knuckle construction across a 2-3/4 inch barrel height stabilizes the door edge along a taller hinge stack, which helps control sag and keeps reveals more consistent over time. A material thickness of 0.095 inch, or 2.4 mm, provides a sturdy hinge leaf, which resists deformation under typical institutional door weights. Tight screw pin construction holds the knuckles in firm relationship, which preserves smooth swinging even after years of opening cycles. Elongated holes on both leaves become a practical alignment tool, letting you shift the hinge slightly during installation to true up doors to face frames or cabinet sides using the 32 mm hole line as a reference.
The Rockford P375-26D is a semi-concealed, free swinging overlay institutional hinge with five knuckles, which positions it for casework needing a restrained look and reliable door movement.
The hinge provides a 270 degree opening, which lets doors swing well past 180 degrees so cabinet interiors are more accessible during loading, cleaning, or maintenance tasks.
The hinge is designed for a 32 mm hole system, which aligns with cabinets laid out on 32 mm centers and works with standard line boring and system drilling operations.
Elongated holes on both leaves allow small shifts of the hinge position, which help fine-tune door gaps and reveals without redrilling when aligning doors to frames.
The hinge has a material thickness of 0.095 inch, or 2.4 mm, which yields a robust leaf that supports frequent opening cycles in institutional cabinetry.
Hospital grade tips indicate a tip style suited to hospital environments, which supports cleaner lines at the barrel end on institutional and health care casework projects.
The Rockford Process free swinging overlay hinge P375-26D in dull chrome offers a five knuckle, semi-concealed layout with 270 degree opening for institutional projects using the 32 mm hole system. Frame leaf length, barrel height, and 0.095 inch material thickness give you defined geometry and strength for repeat-use cabinet doors. For hospital grade and institutional casework that needs overlay doors, controlled alignment with elongated holes, and system drilling compatibility, this hinge provides a clear, specification-based choice for your next run.
Sold In: 25 Pair
